Vivo STAND-V002/GY User manual

Dual Monitor Desk Mount
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/stand-v002
Instruction Manual
SKU: STAND-V002/GY/W/WD
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delievery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/stand-v002
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP
PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART
OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK
OF TIPOVER.
TIPOVER WARNING
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
22lbs
(10kg)
!
PER ARM

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Pole
B(x1)
Clamp C(x1)
Swivel Arm
D (x2)
VESA Plate
S-A (x3)
M6x16mm
Screw
S-B (x2)
M6 Security
Nut
M-A (x8)
M4x12mm
Thumbscrew
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
E (x1)
Grommet
Base Plate
F (x1)
So Pad
G (x1)
Pole Cap
H (x1)
Pole Cable
Clip
I (x4)
Arm Cable
Clip
M-B (x8)
M4x30mm
Screw
M-C (x8)
D6 Spacer
T-A (x1)
3mm Allen
Wrench
T-B (x1)
5mm Allen
Wrench

5
STEP 1: Loosen Clamp
ASSEMBLY STEPS
STEP 2: Option A
Loosen knob on Clamp (B).
B
B
T-A
S-A
A
B
Clamp
Desk Clamp Installation
Mount Clamp (B) to Pole (A) using M6x16mm Screws (S-A) 3mm Allen Wrench (T-A).
Secure assembly to desktop by tightening knob on Clamp (B).
A
Pole
B
Clamp
S-A
M6x16mm
Screw
T-A
3mm Allen
Wrench

6
STEP 2: Option B
Grommet Installation
Using a Phillips screwdriver, remove the screw from Clamp (B) and separate Clamp Bolt (B1) and Clamp
Plate (B2) from the clamp assembly. Thread Clamp Plate (B2) onto Clamp Bolt (B1).
Mount Grommet Plate (E) to Pole (A) using M6x16 Screws (S-A) and 3mm Allen Wrench (T-A).
Remove adhesive backing from So Pad (F) and adhere to Grommet Plate (E).
If not using an existing through-hole for mounting, use a 3/8” (10mm) drill bit to create a
mounting hole in the desired location. Thread Clamp Bolt (B1) with Clamp Plate (B2) through
the mounting hole and into Pole (A).
E
S-A
T-A
A
F
F
So Pad
S-A
M6x16mm
Screw
T-A
3mm Allen Wrench
E
Grommet Base Plate
B1
B2

7
STEP 3: Install Arm
STEP 4: Attach VESA Plate
Slide Pole Cable Clip (H) and Swivel Arm (C) onto Pole (A). Secure Swivel Arm (C) in place using
5mm Allen Wrench (T-B). Attach Pole Cap (G) to Pole (A). Attach Arm Cable Clips (I) to Swivel
Arm (C).G
C
H
AT-B
I
Secure VESA Plates (D) to monitors using M4x12 Thumbscrews (M-A) or M4x30 Screws (M-B).
D6 Spacers (M-C) may be required.
D
VESA Plate
M-A
M4x12mm
Thumbscrew
M-B
M4x30mm
Screw
M-C
D6 Spacer
C
Swivel Arm
H
Pole Cable
Clip
I
Arm Cable
Clip
G
Pole Cap
T-B
5mm Allen
Wrench

8
STEP 5: Install Monitors
STEP 6: Manage Cables
Manage cables using Arm Cable Clips (I) and Pole Cable Clip (H).
IH
Slide monitors with VESA Plates (D) onto Swivel Arm (C). Secure VESA Plates (D) in place
using M6 Security Nuts (S-B).
S-B
DC
S-B
M6 Security
Nut
H
Pole Cable
Clip
I
Arm Cable
Clip

9
STEP 7: Adjust Height
Adjust the monitor tilt using 5mm Allen Wrench (T-B). To level monitors, remove M6 Security
Nuts (S-B) and tighten or loosen adjustment screws using 3mm Allen Wrench (T-A). Once
level, fasten M6 Security Nuts (S-B) back into place.
T-B
S-B
T-A
T-A
3mm Allen
Wrench
T-B
5mm Allen
Wrench

10
3
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
WHO WE ARE
VIVO is more than a brand of ergonomic oice furniture. We are a team of
creative and innovative indivuduals working together to oer high quality,
aordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilitiy.
We oer a wide array of home & oice products
to fit your needs. From height adjustable desks to
monitor mounts to keyboard trays and more!
HEIGHT
ADJUSTABLE DESKS
CABLE
MANAGEMENT
SPEAKER MOUNTS
& STANDS
We oer electric & manual
crank standing desks,
corner frames, desk & top
combos, and more!
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.
Whether you’re mounting
a soundbar or surround
sound system, we’ve got
a mounting solution to fit
your needs.