Vivo MOUNT VW100T User manual

Tilt Wall Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: MOUNT VW100T
Tools Required:
phillips screwdriver
Package Contents
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -https:// i o us.com/products/mount w100t
A(x1)
B (x1)
C(x1) D (x2) E (x1)
-M C (x4)
M8x20
- M D (x4)
M6x30
-M A (x4)
M5x14
- M B (x4)
M6x14
-M G (x8) - M H (x4)
-M E (x4)
M8x30
- M F (x4)
-W C (x6)
-W A (x6) - W B (x6)

Assembly Steps
2
Step 1
Remove nuts from brackets (B) and (C) and replace with
knobs (D).
Step 2
Use template (E) to mark mounting holes on wall where studs
are located. Using a 1/4” bit, drill approximately 3. ” into wall.
Use bolts (W-A) and washers (W-C) to secure mount (A) to the
wall.
Option A: Wood Wall

3
Step 3
Mount brackets (B) and (C) to back on TV using Bolts (M-A, M-
B, M-C) and metal spacer (M-F). Makes sure straps are
towards the bottom of television.
3a
3b
If bolts (M-A, M-B, M-C) are too long, spacers (M-G, M-H)
may be required.
Step 2 (Continued)
Option B: Concrete/Brick Wall
Use template (E) to mark mounting holes on wall. Using a ½”
bit, drill approximately 3.7” into wall. Insert anchors (W-B) into
holes and secure mount (A) to wall using bolts (W-A) and
washers (W-C).

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: 4/2 /2018
6
Step 4
Attach TV to mount (A) as shown in diagram. Make sure bottom
of brackets (B) and (C) are attached securely.
Step 5
To remove, pull both straps down and lift television off of
mount (A).