Vivo STAND-BK01B User manual

Book Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-bk01b
SKU: STAND-BK01B,W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
WARNING!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Pole
E (x1)
VESA Plate
G (x1)
Support Plate
S-A (x6)
ST3.5x10mm Screw
S-B (x1)
M10x30mm Screw
T-A (x1)
5mm Allen Wrench
T-B (x1)
6mm Allen Wrench
H (x1)
Cable Clip
I (x1)
Pole Cable Clip
J (x2)
Page Clip
F (x1)
Pole Cap
B (x1)
Arm
C (x1)
Base
D (x1)
Tray
TOOLS NEEDED
Phillips
Screwdriver
3lbs
(1.4kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
K (x4)
Pad

3
ASSEMBLY STEPS
STEP 1
STEP 2
Remove adhesive backing from Pads (K) and apply them to the underside of Base (C).
Connect Pole (A) to Base (C) using Support Plate (G), M10x30mm Screw (S-B), and 6mm Allen Wrench
(T-B).
K
C
A
C
G
S-B
T-B

4
STEP 3
Turn asssembly over and slide Pole Cable Clip (I), Arm (B), and Pole Cap (F) onto Pole (A). Secure Arm
(B) using 6mm Allen Wrench (T-B). Place Cable Clip (H) onto Arm (B).
STEP 4
Connect Page Clips (J) to Tray (D) using ST3.5x10mm Screws (S-A) and a Phillips screwdriver.
F
B
T-B
I
H
A
D
J
S-A

5
STEP 5
Place VESA Plate (E) on to the back of Tray (D) and secure using ST3.5x10mm Screws (S-A) and a
Phillips screwdriver.
Remove Security Nut (B1) from Arm (B) and slide Tray (D) with VESA Plate (E) onto Arm. Secure using
Security Nut (B1).
S-A
E
D
B1
E
D
B

6
STEP 6
Place book on assembled stand. Adjust Page Clips (J) as needed to hold pages.
J

7
Articulation
Tray can be rotated and positioned as needed. If assembled stand is not holding desired position,
tighten Adjustment Screw (B2) using 5mm Allen Wrench (T-A).
WARNING:
TO AVOID TIPPING, the arm should only be used while
positioned directly over the base.
T-A
B2

LAST UPDATED: 06/06/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303