Vivo MOUNT-XSXU1 User manual

Wall Mount for Xbox Series X
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-xsxu1
SKU: MOUNT-XSXU1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Main Bracket
B(x1)
Lower Support
D(x1)
Upper Support
E (x1)
Security Block
F(x4)
Spacer
J(x8)
M4x5mm
K(x1)
M4x8mm
M(x5)
ST5x40mm
N(x5)
Anchor
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
I (x1)
Security Block
pad
H(x2)
Lower Bracket
pads
G(x4)
Main Bracket
pads
C(x2)
Side Support
L(x1)
M4x10mm
17.6lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
TOOLS NEEDED
Level
Drill
Pencil
Stud
Finder

3
ASSEMBLY STEPS
STEP 2
Assemble the lower support (B), side supports (C) and upper support (D) to the main bracket (A)
using M4x5mm bolts (J). The supports fit behind the main bracket and face forward, with the bolts fit
flush through the front of the main bracket. Tighten with a Phillips screwdriver.
A
J
B
D
C
STEP 1
Remove the paper backing on the pads (G,H,I) and place them as shown below.
Note: Do not attach these pads to the Side Supports (C).
A
G
E
I
H
B
Vertical Mount
Horizontal Mount
C
A
B
C
D
J

4
STEP 3
Place the assembled mount against the wall at the desired location and mark drilling locations with
a pencil. Use of a level and a stud finder is recommended.
Vertical Mount
Horizontal Mount

5
STEP 4
OPTION A: Wood Stud: Drill 1.5” (38mm) deep holes using a 3/32” (2.5mm) drill bit. Follow drywall
installation instructions for all remaining mounting holes.
Install the mount to the wall using ST5x40mm screws (M) with a Phillips screwdriver.
N
M
M
N
Vertical Mount
Horizontal Mount

6
STEP 5
Pre-install lock screw (K or L) so the bottom of the screw is flush with the bottom of the Upper
Support (D). Use screw M4x10mm (L) for vertical mounting and screw M4x8mm (K) for horizontal
mounting as shown below.
L K
Vertical Mount Horizontal Mount
M
N
M
N
OPTION B: Drywall: Using a 5/16” (8mm) bit, drill fully through for drywall. Insert the anchors
(N) into the holes.
Install the mount to the wall using ST5x40mm screws (M) with a Phillips screwdriver.
Vertical Mount
Horizontal Mount
STEP 4 (Continued)

7
Insert the spacers (F) between the console, lower support and side supports. Place the
security block (E) between the Upper Support and the top of the console, making sure the
hole in the block is aligned with the pre-installed lock screw (K or L). Secure the console by
tightening the lock screw.
STEP 7
F
F
E
L
F
F
E
K
Vertical Mount
Horizontal Mount
STEP 6
Vertical mounting: Place the console into the mount, making sure the console is facing to
the le or right so as not to block the rear ports.
Horizontal mounting: Place the console into the mount, making sure the console is facing
up so it does not block the rear ports.
NOTE: Be carful to not hit the Upper Support (D) when installing the Xbox. You may need to
press down on the Lower Support (B) to tilt the Xbox in.
Vertical Mount
Horizontal Mount

LAST UPDATED: 11/11/2020
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If
any parts are received damaged or defective, please contact us. We are happy to replace
parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to
share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303