Vivo STAND-TV01B User manual

Mobil T Cart
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Modl STAN T01B
Tool Rquird
phillips screwdriver
Packag Contnt
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -htt //vivo u.com/ roduct/tand tv01b
A (x2)
Back feet
C (x1)
Plastic cover
B (x2)
Front feet
D (x4)
Metal
spacers
E (x2)
Wheels
F (x2)
Locking
wheels
G (x2)
Poles
F (x2)
Locking
wheels
H (x4)
Cable grommets
I (x1)
Plate
J (x2)
Shelves
K (x2)
Shelf
brackets - R
M (x1)
TV Bracket - R
L (x2)
Shelf
brackets - L
N (x1)
TV Bracket - L
O (x4)
Shelf
clips
M-A (x4)
M x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
M-E (x4)
M8x 0
M-F (x4)
Metal
spacers
M-G (x8)
Spacers
M-H (x8)
Spacers
P-A (x8)
M8x6
P-B (x8)
M8x60
P-C (x2)
M10x3
P-D (x2)
D10 washers
P-E (x4)
D8 washers
P-F (x12)
M8 nuts
P-G (x1)
Wrench
P-I (x1)
8mm Allen key
P-H (x1)
mm Allen key

Ambl% St 
Remove plastic covers from base (C). Attach feet (A,B) using bolts (P-A)
metal spacer (D) and nuts (P-F). Tighten using mm allen key (P-H) and
wrench (P-G). Thread wheels (E,F) into bottom of feet using wrench (P-G).
Reattach plastic covers.
St 1
2
Press button on bottom half of poles-G to extend the two halves.
Slide button into top hole to secure pole length. Insert rubber
cable grommets (H) into holes as shown in diagram. Insert poles
into base (C) and secure using bolts (P-C) and washers (P-D).
Tighten using 8mm allen key (P-I).
St 2

3
St 5a
Attach TV brackets (N,M) to back of television using
bolts (M-A,M-B) and metal spacers (M-F) using
phillips head screwdriver.
St 5b
Attach TV brackets (N,M) to back of television using
bolts (M-C, M-D, M-E) and metal spacers (M-F)
using phillips head screwdriver. If bolts are too
long, spacers (M-G, M-H) may be required.
St 3
Attach plate (I) to poles using bolts (P-B) washers (P-E) and nuts
(P-F) at the desired height. Tighten using mm allen key (P-H)
and wrench (P-G).
St 4
Slide shelf brackets (L,K) into
shelves (J). Mount shelves to
poles by hanging the hooks in
the slots at the desired
heights as shown in the
diagram. Use clips (O) to lock
shelves into place.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Saft% Warning
Contact u at
Last updated: 0 /1 /18
St 6
Hang TV brackets onto plate (I) and tighten security bolt
on the bottom of brackets using phillips head screwdriver
to secure television in place.
St 7
To adjust TV tilt angle, loosen knobs
on TV brackets, then re-tighten when
TV is at the desired position. Manage
cables.
4