Vivo STAND-TV00Y User manual

1
Universal TV Table Top Stand
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND TV00Y
Scan the QR code with your mobile device
or follow the link to helpful videos and
specifications related to this product.
- -https://vivo us.com/products/stand tv00y
Tools equired:
phillips screwdriver
Package Contents

2
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: 4/19/2018
Assembly Steps
Step 1
Connect base plate (A1) to junction
plate (A2) using Bolt (C). Tighten using
Allen key (F). Repeat this process with
base plate (B1) and junction plate (B2).
Step 2
Attach TV bracket (A4) to TV bracket (A3)
using nut (E). Tighten using wrench (G).
Repeat process with TV brackets (B3, B4).
Connect TV bracket (A3) to junction
plate (A2) using bolt (C), nut (D), and
Allen key (F) as shown in diagram.
Repeat process with TV bracket (B3)
and junction plate (B2).
With TV facing down on a clean, flat
surface, mount legs to back on monitor
using bolts (A-F) and washers (G-I)
depending on size of mounting holes in
television. For curved monitors, spacers
(J-K) may be required.
Step 3 Step 4