Vivo STAND-V004Y User manual

Qua Monito Stan
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Moel STAN V004Y
Tool Requie
phillips screwdriver
Package Content
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A (x1) B (x1) C (x1)  (x2)
(x1) F (x1) G (x1) H (x1)
I (x6) J (x2) K (x1) L (x5)
M (x1)
3mm Alle Key
-M C (x16)
D5
-M A (x16)
M4x12
- M B (x16)
M5x12
N(x1)
5mm Alle Key
O (x1)
6mm Alle Key
- -http//vivo u.com/pouct/tan v004y

Aembly Step
Step 1
Option A
Option B
Stick soft pads (L) to bottom of clamp base (F). Slide cable management clip (J) and
base cover (K) on to bottom of pole (A). Thread pole (A) onto clamp (F). Tighten grub
screws in bottom of clamp (F) using 3mm allen key (M). Secure clamp (F) to desktop as
shown in diagram.
Remove screw from top of bolt in clamp (F). Stick soft pads (L) to bottom of grommet
base (E). Slide cable management clip (J) and base cover (K) on to bottom pole (A).
Thread bottom pole (A) onto grommet base (E). Tighten grub screws in bottom of
grommet base (E) using 3mm allen key (M). Slide metal pad (G) over bolt and slide
through grommet hole in bottom of desktop. Thread into bottom of grommet base
(E).
2
Step 2
Slide arm (C) and bracket (D) over top of pole and tighten using mm allen key (N).
10-7mm

3
Step 5
Step 6
Attach cable management clips (I) to arms (C) as shown in diagram.
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor,
making sure to leave 3mm of threads exposed. Aline bolts (M-A or M-B) in VESA
plate. Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom
two holes. Tighten all four bolts using phillips screwdriver.
Step 3
Step 4
Slide cable management clip (J) over bottom of top pole (B). Use pole connector (H)
to attach pole (B) to pole (A) as shown in diagram
Slide second bracket (D) on to pole (B) and tighten using mm allen key (N).

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Waning
Contact u at
Last updated: 0 /01/18
Step 7
Step 8
Step 9
Adjust tension in monitor bracket with 6mm allen key (O) as shown in diagram.
Store allen keys (M,N,O) in
cables management clips (J)
for future adjustments.
Adjust height of monitors using mm allen key (N) as shown in diagram.
4