Vivo STAND-V001V User manual

Single Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001v
SKU: STAND-V001V
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
17.6lbs
(7.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
A (x1)
Column
B(x1)
Base
C(x1)
VESA Bracket
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x2)
M6x16mm Screw
M-A (x4)
M4x12mm SCrew
M-B (x4)
M4x16mm Screw
T-A (x1)
4mm Allen Wrench
T-B (x1)
5mm Allen Wrench
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x2)
M6x12mm Screw
M-C (x4)
Spacer
D(x1)
Cable Clip

3
ASSEMBLY STEPS
STEP 1
STEP 2
Secure VESA Bracket (C) to Column (A) using M6x12mm Screws (S-B) and 4mm Allen Wrench (T-A).
Slide Cable Clip (D) onto Column (A). Assemble Column (A) to Base (B) using M6x16mm Screws (S-A)
and 4mm Allen Wrench (T-A).
STEP 3
Assemble the monitor to VESA Bracket (C) with Screws (M-A or M-B) and Spacers (M-C) if necessary.
Tighten using a Phillips screwdriver. Adjust the tilt of VESA Bracket (C) using 5mm Allen Wrench (T-B).
Manage cables and store Allen Wrenches (T-A, T-B) using the cable clip on Column (A).
C
A
S-B
T-A
CM-A/M-B
M-C
T-B
A
T-A
T-B
D

LAST UPDATED: 06/30/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303