Vivo STAND-TV00H User manual

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00h
SKU: STAND-TV00H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
TV Plate
B(x2)
Monitor Bracket
C(x1)
Tempered
Glass
J (x4)
Rubber Foot
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
D(x2)
Support Pole
E(x2)
Plastic Socket
F (x2)
M8 Washer
G(x2)
M8x22 Bolt
H (x4)
M6x10
I (x4)
M6 Washer
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
L (x4)
M4x12
M(x4)
M4x30
N(x4)
M6x20
O(x4)
M6x35
P (x4)
M8x20
Q (x4)
M8x35
R(x4)
M4 Washer
S (x4)
M6 Washer
T(x4)
M8 Washer
U (x4)
M4 Spacer
V (x8)
M6/8 Spacer
W(x1)
Allen Wrench
X(x1)
Security Wire
Kit
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Attach TV plate (A) to support poles (D) using M6x10 bolts (H) and M6 washers (I). *TV plate (A) can be
installed on wall optionally, wall mounting hardware is not included.
TOOLS NEEDED
110lbs
(49.90kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
Stick rubber feet (J) to bottom of tempered glass (C). Secure support poles (D) to tempered glass (C)
using M8x22 bolts (G), M8 washers (F), and plastic sockets (E) as shown in diagram.

4
STEP 3
First, make sure you have the correct diameter bolt (L to Q) your TV requires. Once you have the
correct size, please see the diagram below. You will then thread the bolt through the bracket (B) into
the TV using the correct washers (R,S,T), and using the spacer (U,V) if necessary. Please make sure the
TV brackets are vertically centered and level with each other.

5
STEP 4
Attach Monitor Brackets (B) to TV Plate (A) as shown in diagram.

6
STEP 5a
If your TV is located near a wall as shown in diagram 5a, then the security wire can be attached for
added safety. This is done by attaching the two ends of the security wire to the top two holes on the
back of the TV, shown in diagram 5b. The other end of the security wire can then be attached to the
wall, according to wall type, shown in diagram 5c and 5d.
Option A: Wood Wall
DIAGRAM A DIAGRAM B
DIAGRAM C

7
STEP 5 (continued)
Option B: Concrete/Brick Wall
DIAGRAM D

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303