Vivo STAND-V101C User manual

Single Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v101c
[email protected]om www.vivo-us.com 1-309-278-5303
SKU: STAND-V101C

2
PACKAGE CONTENTS
WARNING!
A (x1)
VESA Plate
B(x1)
Clamp
C(x1)
Pole Cover
J (x1)
3mm Allen Key
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D (x1)
Cable Clip
E(x1)
Pole
F (x1)
Base Cover
G(x1)
Grommet Base
H (x5)
So Pad
I (x1)
Metal Pad
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
K (x1)
4mm Allen Key
L (x1)
6mm Allen Key
M-C (x4)
M5x12
M-A (x4)
M4x12
M-B (x4)
M4x16
M-D (x4)
M5x16
M-E (x4)
D5 Washer
M-F (x4)
D8 Washer
O (x8)
M5x12
M (x1)
VESA Bracket
N (x1)
VESA Bracket
P (x8)
M5 Nut
M-G (x4)
Spacer

3
ASSEMBLY STEPS
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
OPTION A: Clamp Installation
Slide cable management clip (D) and base cover (F) on to bottom of pole (E). Attach pads (H) to clamp
(B) as shown in the diagram. Thread pole (E) onto clamp (B). Tighten grub screws in bottom of clamp
(B) using 3mm allen key (J). Secure clamp (B) to desktop as shown in diagram.
OPTION B: Grommet Base Installation
Remove screw from top of bolt in clamp (B). Stick so pads (H) to bottom of grommet
base (G). Slide cable management clip (D) and base cover (F) on to bottom pole (E).
Thread pole (E) onto grommet base (G). Tighten grub screws in bottom of grommet
base (G) using 3mm allen key (J). Slide metal pad (I) over bolt and slide through
grommet hole in bottom of desktop. Thread into bottom of pole (E).
STEP 1
Install pole cap (C) to top of pole (E).
E C
10-88mm
J
D
E
F
B
H
10-8 0 mm
D
F
I
J
B
G
H

4
STEP 3
OPTION A1
Attach VESA bracket (A) to pole (E)
using 4mm allen key (K).
OPTION A2
Attach two bolts (M-A or M-B) and washers (M-E)
to top mounting holes of monitor, making sure to
leave 3mm of threads exposed. Align bolts (M-A or
M-B) in VESA plate. Secure using two more bolts
(M-A or M-B) and washers (M-E) in the bottom
two holes. Tighten all four bolts using phillips
screwdriver.
OPTION A3
Adjust tension in bracket using
6mm allen key (L).
OPTION A4
Store allen keys (L,K) in cable
management clip (D) for future
adjustments.
OPTION A5
Adjust as desired.
K
A
TV
TV
TV
M-A/M-B
M- E
1
2
3m m
3
M-A/M-B
M- E
+45 °
-45°
L
K
L
D
360°
+45°
-45°

5
STEP 3 (Continued)
OPTION B1
Mount VESA extension (M,N) to VESA bracket (A) using the M5x12 bolt (O) and the M5
nut (P) in 200mmx200mm or 200mmx100mm orientations according to mounting holes
on your monitor.
OPTION B2
Attach VESA bracket (A) to back of monitor using bolts (M-C or M-D) and washers (M-F).
Spacer (M-G) may be required.
VES A 200x20 0
VES A 200x10 0
200m m
200m m
200m m
100m m
P
P
P
O
O
TV
M- D M- G
M- F
M- C M- F
M- D
M- F
M- G
A
M- C
M- F
M-D
M-F
M-G
M-D
M-F
M-G

6
STEP 3 (Continued)
OPTION B3
Attach VESA bracket (A) to pole (E) using 4mm allen key (K).
OPTION B4
Adjust tension in bracket using 6mm allen key (L).
A
E
L
+45 °
-45 °

7
STEP 3 (Continued)
OPTION B5
Store allen keys (L,K) in cable management clips (D) for future adjustments.
OPTION B6
Adjust as desired.
K
L
+45°
-45°
360°

LAST UPDATED: 09/16/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M