Vivo STAND-SP04H User manual

48” Speaker Stand for SONOS PLAY 1 and PLAY 3
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-sp04h
SKU: STAND-SP04H
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
B1 (x1)
Pole
B2 (x1)
Base
A1 (x1)
Mounting
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A2(x1)
Mounting
Bracket
A4 (x4)
Carpet Spike
A5 (x4)
Plastic Feet
A6 (x4)
M5x16
A7 (x4)
M6x12
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A8 (x1)
1/4”x7/16”
A9 (x2)
Plastic Hook
A10 (x2)
Pin
A11 (x1)
4mm Allen Key
A3 (x1)
Plastic Cover
A12 (x1)
3mm Allen Key
A13 (x1)
1.5mm Allen Key
B1
B2

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
STEP 2
OPTION 1
Screw carpet spikes (A4) into base (B2). Adjust to sit flat and tighten nuts to hold spike position.
Assemble pole (B1) to base using long screws
(A6) and tighten with 3mm Allen key (A12).
OPTION 2
Screw plastic feet (A5) into base (B2). Adjust to sit flat.
A4x4
B2
A5x4
A6x4 A12
B1
6.6 lbs
(3 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

4
STEP 3
Loosen set screw using 1.5mm Allen key (A13), adjust pole height, then tighten set screw.
STEP 4
OPTION A
Assemble PLAY:1 mounting bracket (A2) to pole using flat head screws (A7) and tighten with 4mm
Allen wrench (A11). Press plastic cover (A3) onto top of mounting bracket.
A13
A2
A7x2
A3
A11

5
STEP 4 (Continued)
OPTION B
Assemble PLAY:3 mounting bracket (A1) to pole using flat head screws (A7) and tighten with 4mm
Allen key (A11). Press plastic cover (A3) onto top of mounting bracket.
A1
A11
A3
A7x2

6
STEP 5
OPTION A
Insert mounting screw (A8) into back of Sonos PLAY:1 speaker, leaving 5mm of thread exposed. Place
speaker on stand, making sure screw is inserted into slot, then tighten screw to secure the speaker.
A8
5mm

7
STEP 5 (Continued)
OPTION B
Place Sonos PLAY:3 speaker on stand and secure center screw hole using mounting screw (A8). Insert
plastic locks (A9) through vertical holes in bracket and speaker, and secure with pins (A10).
A8
A9x2
A10x2

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303