Vivo VESA User manual

VESA Mounting Adapter Kit for iMac
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-macb
SKU: STAND-MACB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Adapter Plate
M-A (x2)
M4x12
M-C (x8)
M5x16
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
M-D (x4)
D5 Washer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Insert M4x12 nylon screws (M-A)
into sides of adapter plate (A).
Attach adapter plate to VESA
mount using x4 screws (M-B
or M-C), D5 washers (M-D) and
nyloc nuts (M-E or M-F).
Please note that the screws
must be force-tightened through
the nylon inserts in the nyloc
type nuts.
M-E (x4)
M4 Nut
B (x1)
70mm Adapter Ring
C (x1)
72mm Adapter Ring
D (x1)
Clamp Plate
M- A
A
M-B/M- C M- D
M-E/M- F
M-B (x4)
M4x14
M-F (x4)
M5 Nut

3
STEP 2
STEP 3
Adjust iMac to comfortable viewing position.
OPTION A: 21.5” iMac Installation
Assemble adapter plate (A) and clamp plate
(D) to base of iMac using M5x14 screws (M-C),
making sure the plates are properly fit to the
cable hole and leaving screws slightly loose.
Tighten nylon screws to level the iMac, then
tighten the rest of the screws.
Please note that the plastic adapter rings are
NOT used with the 21.5” iMac.
OPTION B: 27” iMac Installation
Assemble adapter plate, adapter ring (B or
C) and clamp plate (D) to base of iMac using
M5x14 screws (M-C), making sure the plates
are properly fit to the cable hole and leaving
screws slightly loose. Tighten nylon screws
to level the iMac, then tighten the rest of the
screws.
Please note 70mm ring fits models from mid-
2012 and older, and 72mm ring fits models
from late-2012 and newer.
D
M- C
D
M- C
B/ C

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303