ViziT UKP-12-1 User manual

UKP
UKP
SPECIFICATIONS
mm
.kg
++
+
PARTS LIST
UKP-12-1
SAFETY INSTRUCTIONS
15 VDC
-12-1
-12-1 VIZIT.
54 х 200 х 40
0 18
5 °С 45 °С
93% 25°С
1
1
1
OPERATING INSTRUCTION
Apartment Handset the Handset hereinafter) is intended for operation within doorphones
Connection of an additional handset
Duplex intercom
DOOR OPEN button
Ring volume slide switch
Call indicator
Dimensions (W)x(H)x(D)
Weight
Ambient temperature range to
Relative humidity of air up to at
Handset pc.
Fastening kit pc.
Operating instruction pc.
The Handset does not contain voltage above .
Do not connect the handset to a telephone line!
(
-
-
-
-
-
FEATURES
Call
indicator
DOOR OPEN
button
Ring volume
slide switch
Base
Handset
Handset Appearance and Terminals Layout
Terminals
to connect
additional
handset
Terminals
to connect commutator / doorstaton
Jumper
Positions
- when an additional
handset is connected
- - when there is no
additional handset
EQV. UKP
UKP
EQV
:
-
.
.
www. 5UKP-12-1 Operating Instruction (revision 12)vizit-group.com 31/201 -

2
107 mm
1
3
3
- Put two marks on a wall with the center
to center distance 107 mm between
them. You may use the pattern given
here on the right.
Drill two holes (1) in the wall with 6 mm
in diameter and 40 mm depth.
- Drive nylon anchors (2) into the holes
and fasten screws in the
anchors (fasteners are supplied).
3.5х22 (3)
- Hook the base on the screws, and hang it ( ) on the wall.
Set the ring volume slide switch to select
the comfortable ring volume:
Hang up the handset ( ) on the base.
9
- (10)
-11
position sets the ring volume;
position sets the ring volume.
The switch’s position also influences the volume
of intercom.
-
0
I
minimum
maximum
- (4)
(5)
-
Connect doorphone wires to the terminals
on the base’s back following the diagrams
given in the section
Observe polarity of wires.
Lay the wires in the recess , and then lead
them along the groove
EXAMPLES OF WIRING
DIAGRAMS.
(6)
(7).
- (8)
-
Set the jumper to one of the
following positions:
- if an additional handset is connected;
- - if there is no additional handset.
EQV. UKP
UKP
EQV
4
9
11
INSTALLATION
Note: (12)Button is intended for door lock release.
The button releases the door lock only after intercom
has been engaged.
10
12
107 mm
6
5
4
7
8
www. 5UKP-12-1 Operating Instruction (revision 12)vizit-group.com 2 3/201 -

Doorstation
BVD 405A-1-
Power supply unit /
Switching adaptor
19w/14.4v/EU( V 1 0A)18 , .
Handset UKP-12-1 with additional apartment handset UKP
and doorstation BVD- within individual doorphone VIZIT405А-1
LINE
GND
Ek
SEL
Commutator
-BK 4M
.
For further connections see the operating instruction
on a doorstation/ control unit
EXAMPLES OF WIRING DIAGRAMS
LINE
GND
+E
VO
Ec
LC
+
-
DC 18V
IN-LINE
DC JACK
UKP-12-1
+
-
UKP-12
Handset UKP-12-1 with additional handset UKP and
commutator BK-4M within multi-apartment doorphone VIZIT
FA
LN
UKP-12-1 UKP-12
FB
FC
LN
FD
www. 5UKP-12-1 Operating Instruction (revision 12)vizit-group.com 3 3/201 -