ViziT BVD-343 Series User manual

BVD
BVD-343x BUD-302M BUD-302 BUD-302K-20
R
V
Note: Only VIZIT-RF-2 keys from VIZIT are supported.
VIZIT
BUD-302 BUD-302M BUD-302K-20
-343х
С
Р
*
125
-
®
Doorstation operates together with Control Units , and
The following models are available:
Abbreviations used in the model index:
- RF-keys reader (PROXIMITY, kHz)
(TM-key: DS1990A / iBUTTON)
- Colour camera
- B/W camera
Pinhole lens
Contents of doorphone / video doorphone, its features, order of programming and operation are described in the
Control Unit / / operating instruction.
in multi
apartment doorphones and video doorphones of Series 300.
- TM-keys reader
VIZIT
T
Figure Doorstation BVD-343x1 -
1
2
3
Speaker
Camera
5TM-keys reader
Illumination
for the camera
1
2
4
5
RF-keys reader
7
4-digit LED
7
3
6
4Microphone
6
BVD 43R*-3
BVD 43RVP*-3
u
uu
BVD 43R P*-3 С
uu
BVD 43RT*-3
BVD 43T-3
u
u
BVD 43T P-3 С uu
BVD 43TVP-3 uu
u
Model
B/W with
illumination
Camera
Pinhole Lens
Reader
Colour with
illumination
RF TM

PARTS LIST
SAFETY INSTRUCTIONS
18V
WARNING
INSTALLATION
Fig. 5 6
Fig. 7
The product does not contain voltage above .
Connect the earthing wire (green/yellow) of the doorstation to the protective earth.
Do not modify the product design and circuits yourself.
Refer to a Qualified Service Personnel.
Take care not to spill any liquids or chemically active substances on the product.
Unplug the Control Unit before cleaning the doorstation. Clean by wiping with dry soft cloth.
Do not use any liquid cleaners, aerosol cleaners or abrasive agents.
Before mounting and wiring, examine carefully the operating instruction for the installation order and wiring diagrams of
the doorphone / video doorphone components (see , - connection of the doorstation to the control unit and
electromagnetic lock; - connection to the control unit and electromechanical lock).
Mounting items (2, 4, 5) are supplied
§
§
Do not perform any connections or repair when the power
is on!
Screw 0- 4х4 Concrete Insert 6х30
x 2 x 2
Gag
x 4
Fasteners
Operating Instruction
x1x1
BVD-343х
1
2
159 mm
5
4
Figure Doorstation Wall-mounting2 -
1Hole
diameter mm
depth mm
()
6
35
х2
2
3
4
Concrete Insert 6х30 ( )х2
Doorstation
Screw - 4х40 ( )х2
5Gag ( )х2
3

Locate the doorstation to avoid:
-direct rays of the sun or other light sources
-direct hit of rain and snow
150 сm
50 сm
50 с
m
68°
Figure Recommended doorstation position and
the camera field of view
3 -
Terminals to
connect the
Control Unit
Figure Terminals Layout4 -
GND
SP+
SP-
+E
MIC
RX
TX
VG
VO
Abbreviations used on Figures 4-7:
Video Out
Video GROUND
RX, TX Doorstation and
Control Unit Data
Microphone
Supply Voltage for Doorstation
Speaker
GROUND
VO
VG
MIC
+Е
SP+, SP-
GND
Coax
cable
holder
Earthing
terminal

Figure Doorstation with control unit ,
electromagnetic lock
BVD-343x BUD-302 (M, K-20)
EXIT 300
5 -
VIZIT-ML400 and button
Red
Green White
Black
Blue
Electromagnetic
Lock VIZIT-ML400
Button
EXIT 300
RX
SP-
TX
CONTROL UNIT
BUD K-302 (М, -20)
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
1362 87
1
2
3
6
5
4
9
8
To
or
BK-4V(MV)
RVS-4
DOORSTATION
BVD 43-3 х
SP+ 2
SP- 3
MIC 5
RX 6
GND 1
+E 4
VG 8
VO 9
7
TX 7
Electromagnetic
Lock VIZIT-ML400
Button
for exit
Figure Doorstation with control unit ,
electromagnetic lock and button for exit
6 - BVD-343x BUD-302 (M, K-20)
VIZIT-ML400
RX
SP-
TX
CONTROL UNIT
BUD M K-302 ( , -20)
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
1362 8
1
2
3
6
5
4
9
8
To
or
BK-4V(MV)
RVS-4
DOORSTATION
BVD 43-3 х
SP+ 2
SP- 3
MIC 5
RX 6
GND 1
+E 4
VG 8
VO 9
7
TX 7
7
Figure Doorstation with control unit
and electromechanical lock
7 - BVD-343x BUD-302 (M, K-20)
RX
SP-
TX
CONTROL UNIT
BUD K-302 (М, -20)
45
+DL
-DL
OP
TM
SP+
GND
MIC
+E
DSD
1362 8
50 V
1A
1
2
3
6
5
4
9
8
To
or
BK-4V(MV)
RVS-4
7
7
DOORSTATION
BVD 43-3 х
SP+ 2
SP- 3
MIC 5
RX 6
GND 1
+E 4
VG 8
VO 9
TX 7
Electromechanical
Lock ( R ≥ 10 Ohm)

Do not use electromagnetic locks with less than 20 Ohm impedance and not provided with a built-in degaussing
module.
Do not use electromechanical locks with less than 10 Ohm impedance.
7
MK-311
SPECIFICATIONS
V
3W
mm
6kg
OPERATING CONDITIONS
If you use an electromechanical lock, a damper diode (50V / 1A, not supplied) shall be connected to its terminals
(See Fig. ).
Mounting Kit is recommended to protect the doorstation from rain, snow and direct sun rays.
Operating voltage
Power consumption max
Dimensions (W)x(H)x(D) x x
Weight
Camera parameters are given below:
15
87 171 24
0.
Ambient temperature range:
-to
-to
Relative humidity of air: up to at
BVD-343R / RT / T -40 45
BVD-343RCP / RVP / TCP / TVP -30 45
98% 25
°C °C
°C °C
°C