Vollrath KD PLASTIC CART 97101 User manual

OWNER’S MANUAL
Form No. 21814 Rev. B 1/04
KD PLASTIC CARTS
Assembly Instructions
and Parts List
MODELS:
97101 — 2 Shelf KD Plastic Cart
97102 — 3 Shelf KD Plastic Cart

OWNER’S MANUAL KD Plastic Cart
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS STEP 3
Insert second group of support tubes over each projection of
second shelf — refer to Step 1.
STEP 1
Lay shelf on flat surface (smooth side up). Insert a support
tube over each projection as shown. Place the hammer block
into a support tube and with a rubber mallet, pound down
gently until support tube bottoms out against shelf. Do this
on all four (4) corners.
Hammer Block
Corner
Projection
Corner Projection
Hammer Block
Top of Shelf
is Viewed
Support Tube
Top of Shelf
is Viewed STEP 4
Support Tube Position third shelf — refer to Step 2.
STEP 5
STEP 2 Insert socket into caster plug as shown.. User hammer block
and rubber mallet to drive socket all the way in.
Position second shelf (smooth side up) on the above
assembly, making sure that the four (4) corner projections
underside of second shelf insert into each support tube.
Place hammer block on top of corner projections of second
shelf, and with a rubber mallet, pound down gently until
shelf bottoms out against support tube. Do this on all four
(4) corners.
Socket (Metal)
Hammer Block
Caster Plug
Corner
Projection
.
Top of Shelf
is Viewed
Support Tube
Form No. 21814 Rev. B 1/04 Page 2

KD Plastic Cart OWNER’S MANUAL
ASSEMBLY INSTRRUCTIONS
STEP 8
STEP 6 Flip cart over as shown. Insert a handle tube into one (1)
handle support, right side and one (1) handle support, left
side. Place assembly into the corner projections of the top
shelf as shown. At the same time press down on both handle
supports insuring that the part is in securely. (Repeat for
other side).
Flip cart over. Insert caster plug into each corner projection.
Place hammer block over caster plug and with a rubber
mallet, pound down gently, making sure that the caster plug
bottoms out against corner projection, insuring that the part
is in securely.
STEP 7
Insert the stem of the caster all the way into the caster plug.
Do this on all four (4) corners.
Handle Support
Right Side
Caster Plug
Handle Tube
Corner Projection
Leg of
Handle
Support
Handle
Support Left
Side
Bottom of Shelf
is Viewed
Corner Projection
Support
Tube
Caster
Stem of Caster
Bottom of Shelf
is Viewed
Caster Plug
Corner Projection
NOTE: The direction of the leg of the handle support is
pointing away from the cart.
Caster
Corner Projection
Stem of
Caster
Support
Tube
Bottom of Shelf
is Viewed
Page 3 Form No. 21814 Rev. B 1/04

OWNER’S MANUAL KD Plastic Cart
ASSEMBLY INSTRUCTIONS
EXPLODED VIEW — 2 SHELF CART
EXPLODED VIEW — 3 SHELF CART
Replacement Parts List
Ref. No. Part. No. Description
1 21961 Handle Support, Left Side
2 21816 Handle Tube
3 21561 Plastic Shelf 18″x 31″
4 21817 Support Tube 12″(model 97102 only)
5 21860 Support Tube 24½″(model 97101 only)
6 21962 Caster Plug (plastic)
7 21815 Socket (metal)
8 21800 Caster 4″Diameter
9 21960 Handle Support, Right Side
--Not Shown--
10 21963 Hammer Block
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53082-0611
U.S.A.
Main Tel: [phone]
Service Tel: [phone]
Fax: [phone]
Vollrath of Canada, Ltd.
6320 Danville Road, Unit 1
Mississauga, Ontario L5T 2L7
Canada
Tel: [phone]
Tel: [phone]
FAX: [phone]
Form No. 21814 Rev. B 1/04 Page 4