VonHaus 08/091 User manual

MEDIUM DIGITAL
SAFE
08/091 - Instruction Manual
LOW
BATTERY PROCEED
ADY

CONTENTS
Safety Instructions 1
Tools Required, Securing the Safe 2
Specification 3
Before Use 4
Quick Set Up, Usage 5
Troubleshooting 6
Warranty 7

WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
This manual contains important information
regarding the operation and maintenance of
the Medium Digital Safe. Please ensure you
read and understand all instructions regarding
the correct operation of the product before
securing items in the Safe.
INTENDED USE.
This Safe is designed and intended for
domestic indoor use only. Do not use for
commercial purposes.
This Safe is not a toy. Keep away from children.
Children should be supervised to ensure they
do not play with the Safe.
ADVICE AND GUIDANCE FOR USE.
NEVER store the override keys (or the manual)
in the Safe. Once the batteries have been
exhausted, you will require the keys to override
and open the Safe. For security reasons, spare
keys are not available.
IMPORTANT: Store the override keys in a
safe place for use in the event of the batteries
becoming exhausted, or should the unlock
code require resetting.
Periodically check the batteries for charge
(every 3 months or as appropriate). If
the batteries are of low charge, replace
immediately. Refer to the ‘Battery Safety’
section for guidance on battery use.
NOTE: This Safe is NOT fireproof or cash
rated. Contact your insurance provider for
guidance before storing any valuables in the
Safe.
For security purposes, it is recommended that
you secure the Safe to both a suitable wall
and floor surface using appropriate fixings.
Contact your local hardware store or qualified
person for advice and guidance on the most
appropriate fixings to use for your wall/surface.
The Safe should be located out of sight for
extra security.
Fixings supplied are intended for use with
some masonry wall surfaces. If you are unsure
about assembly or the suitability of your wall or
the fixings, do not proceed. Contact a qualified
person for advice and guidance.
NOTE: These important safeguards and
instructions cannot cover all possible
conditions and situations that may occur. It
must be understood that common sense and
caution are factors which cannot be built into
any product and are the responsibility of the
user.
The Safe contains no user-serviceable parts
with the exception of battery replacement.
Repairs should only be carried out by a
qualified person. Improper repairs may
compromise the integrity or function of the
Safe.
BATTERY SAFETY.
This product requires 4 x 1.5V LR6 “AA” Bat-
teries (included).
Batteries are to be inserted according to the
correct polarity as indicated on the Safe.
Always recharge a full set of batteries at the
same time. Do not mix old and new batteries.
Only use batteries of the same or equivalent
type (e.g. Alkaline, Lithium-ion etc.)
Do not attempt to recharge non-rechargeable
batteries. Rechargeable batteries should be
removed from the Safe before recharging.
Do not attempt to short-circuit the supply
terminals or batteries for any reason.
Do not dispose of batteries in a fire. Do not
attempt to crush, puncture or in any way dis-
mantle the batteries for any reason.
Do not dispose of batteries in your household
waste. Batteries contain chemicals which are
damaging to the environment. Recycle bat-
teries where appropriate. Contact your local
government offices for advice and guidance
on the correct disposal of batteries or local
recycling centres.

SECURING THE SAFE
TOOLS REQUIRED *NOT INCLUDED
Power Drill Suitable Drill Bit Suitable Screwdriver Wrench Pencil
2
For security reasons, it is recommended that you
secure the Safe against a secure masonry wall and
floor surface.
1. Locate the area where the Safe is to be installed.
2. Using a pencil, mark the centre of the mounting
holes inside the Safe against each surface.
3. Using a suitable drill bit, drill pilot holes in these
positions.
4. Place the Safe over the pilot holes and insert the
fixings (including washers to protect the Safe walls)
into the pilot holes. Tighten to secure.
WALL
BACK OF SAFE
Nut & Washer on the
inside of the Safe.

SPECIFICATIONS
Length: 200mm
Width: 310mm
Height: 200mm
DIMENSIONS
4.5 AA 9.3
kg 4 x 1.5V LR6 NoneNone
L
NET
WEIGHT
BATTERY
POWER
CASH
RATING
FIRE
PROOFING
INTERNAL
VOLUME
1. Anchor Bolts
2. Override Keys
3. 1.5V LR6 “AA” Batteries (x4)
4. Electronic Keypad
5. Lock Cover
6. Locking Handle
7. LED Indication
8. Battery Cover (not shown)
9. Reset Button
2
1
3
3
LOW
BATTERY PROCEED
ADY
6
5
4
7
*Anchor Bolts are suitable for most masonry walls.
Anchor Bolts are not suitable for stud or plaster
walls. The Safe should not be mounted to stud or
plaster walls for security.

OVERRIDE KEY
The Override Keys provide a way to open the Safe if
you have forgotten your code or the batteries have
been exhausted.
WARNING! NEVER lock your Override Keys (2) in
the Safe. Keep separate in a secure location for future
use.
Unlock the Safe using the Override Keys. Open the
Lock Cover (5) to expose the keyhole. Insert the
Override Key and turn anticlockwise (left) to the end
and hold in this position. Turn the Locking Handle
(6) clockwise (right) and then open the Safe. Return
the Override Key to its central position and retain for
future use.
INSTALLING BATTERIES
Remove the battery cover located on the back of the
Safe door. Push in the catch and carefully remove the
cover.
Insert 4 x 1.5V LR6 “AA” Batteries (included) accord-
ing to the correct polarity as indicated on the inside
of the battery compartment. Replace the battery
cover to secure.
LOW BATTERY INDICATION
The Red Low Battery Light will illuminate when the
Safe is opened to indicate whether the batteries need
replacing. If lit, replace the batteries before closing
the Safe.
NOTE: Periodically check the batteries (every 3
months or as appropriate). Replace if necessary. If
the batteries are exhausted or removed, the Safe
will retain the user unlock code for approximately 4
hours. After this time, the user will be required to
open the Safe using the Override Key and reset their
unlock code.
BEFORE FIRST USE
4
LOW
BATTERYPROCEED
ADY

USAGE
SETTING AN UNLOCK CODE
Open the Safe door and locate the protruding button
press to begin.
• The Safe will beep. The Orange Indicator Light
will illuminate for approx 20 seconds.
• During this period, select and enter an unlock
code between 3-8 digits long and press the “A
or B” button to assign the code.
• If successful, the Safe will confirm with beeps.
NOTE: It is recommended that your unlock code be
easily memorable but should not be personal infor-
mation such as birthdays, anniversaries, telephone
numbers etc. as these may be easy to guess and
compromise the security of the Safe.
OPENING THE SAFE USING THE UNLOCK CODE.
• Once an unlock code has been set, the Safe can
be opened by entering the unlock code using
the Electronic Keypad (4) and confirming the
code by pressing “A or B”.
• The Orange Indicator Light will illuminate to
acknowledge the input of each number. If
the correct code is entered the safe will beep
and the locking mechanism will disengage for
approx. 5 seconds.
• During this period, turn the Locking Handle (6)
clockwise (right) and then open the Safe.
NOTE: If the user has entered an incorrect code, the
Orange Indicator Light will illuminate. The user must
enter the code again. Inserting the wrong code 3
times in a row will lock the electronic keypad for 20
seconds.
LOCKING THE SAFE
Close the Safe door and turn the Locking Handle anti-
clockwise (left) to engage the locking mechanism.
QUICK SET UP
1. Open the door with key, (lock is located behind the Lock Cover (5).
2. Insert batteries .
3. Press the Reset Button (located inside the safe).
4. Insert desired code followed by “A” or “B” buttons.
5. To unlock use the code followed by the “A” or “B” buttons.

[phone]

DISPOSAL INFORMATION
COPYRIGHT
WARRANTY
Please recycle where facilities exist. Check with your local authority for recycling advice.
All material in this instruction manual are copyrighted
by DOMU Brands Ltd.
Any unauthorised use may violate worldwide
copyright, trademark, and other laws.
To register your product and find out if you qualify
for a free extended warranty please go to
www.Vonhaus.com/warranty.
Please retain a proof of purchase receipt or
statement as proof of the purchase date.
The warranty only applies if the product is used
solely in the manner indicated in the Warnings page
of this manual, and all other instructions have been
followed accurately. Any abuse of the product or
the manner in which it is used will invalidate the
warranty.
Returned goods will not be accepted unless re-
packaged in its original colour box and accompanied
by a relevant and completed returns form. This does
not affect your statutory rights.
No rights are given under this warranty to a
person acquiring the appliance second-hand or for
commercial or communal use.

VonHaus is a registered trademark of DOMU Brands Ltd
Made in China for DOMU Brands Ltd BL2 2HH
Thank you for purchasing the Medium Digital Safe