VS Vereinigte Spezialmöbelfabriken LiteTable-AL User manual

3
VS Vereinigte Spezialmöbelfabriken GmbH & Co. KG
Hochhäuser Straße 8 · 97941 Tauberbischofsheim · Tel.: [phone] · [email protected]
http://links.vs-service.com/downloads/70-145_V06_DEEN_LiteTable-140941.pdf
LiteBench
LiteTable-AL LiteTable-ST
Intended use: This table is a universal stacking table for
variable use for example in office/business, teaching and
cafeteria areas, etc. Any other use (e.g. in workshops, storage
areas or wet rooms) is classed as non-intended use.
VS Vereinigte Spezialmöbelfabriken GmbH & Co. KG is not
liable for damage resulting from such non-intended use.
General note: Please read these instructions and in particular
the notes on safety carefully and in full before using the
products. Keep the instructions in a safe place for subsequent
reference and pass them on to other users.
General note on safety: We use the following symbols and
notes in our operating instructions:
Important! This symbol refers to an
important note on assembly.
Caution! This symbol refers to a
very important note.
On the internet: These instructions can also be downloaded
from the internet (see header).
Standards: Tested according to DIN EN 1729-2
Table and seat heights according to 1729-1.
Scope of delivery: The product is delivered fully assembled.
Operation: Follow the instructions on the following pages.
Troubleshooting and service: If faults occur, please contact
our Aftersales Service [email protected]
Maintenance and cleaning: On the Internet:
vs.de/kataloge/reinigung/en
Forwarding: Also pass on these instructions for use if the
product is forwarded to another party.
Disposal: The indicated electric and electronic components
must not be disposed of with the ordinary waste.
They must be removed from the furniture unit
before the unit is sent for disposal.
They are to be disposed of at authorized collection
and return points.
INSTRUCTIONS FOR USE: 70-145 V06 050420
Stacking table /- Bench.
LiteTable-AL: 21011-21021;
LiteTable-ST: 21090-21095, 21083-21087, 21053-21057.
LiteBench: 31083-31087.

1 2 3 4 (LiteTable-AL) 5 (LiteTable-ST)
4
Stacking tables:
Max. 8
Rectangular
table size up to
max.140x70cm
Max. 4 tables
for all other
sizes.
General use.
Caution! Maximum load table 150 kg,
version with casters 100 kg.
maximum load bench 300 kg
LiteTable combinations.
[Fig. 1] The tables can be combined as desired, depending
on the model. Here the protruding leg must be located under
the table top of the adjoining table. The only exception is
the combination with trapezoidal tables and semicircular
tables (LiteTable-AL type).
LiteTable connection with table
connectors.
[Fig. 2] Many combinations can be connected to form a
single unit using table connectors.
LiteTable stacking.
[Fig. 3] The tables can be stacked. Before stacking, make
sure that there are no objects on the table surfaces. When
stacking, make sure that the tables are stacked at an offset
angle and are pushed up to the end stop.
Caution! When stacking, make sure that the tables,
benches are pushed up to the end stop and that the
maximum stacking number (max. 8 rectangular tables
or max. 4 other table shapes) is not exceeded.
Danger of toppling over.
LiteTable with casters.
[Fig. 4+5] Prior to moving, make sure that all objects have
been removed from the table surface. Only individual tables
(free from load) may be moved on casters. To avoid damaging
the casters, do not move the tables over door sills or uneven
surfaces.
Caution! Lift tables slightly only – risk of toppling over.
Move tables on casters individually only.