Vulcan-Hart GHX45 User manual

Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
0
8
7
2
A
1
0
0
9
O
S
I
.
o
C
t
r
a
H
-
n
a
c
l
u
V
F-32238 (05-06)
S
E
I
R
E
S
X
H
G
:
LE
D
O
M
g
n
a
R
s
a
G
o
d
n
a
p
x
E
y
t
u
D
y
v
a
e
He
GHX SERIES
HEAVY DUTY EXPANDO GAS RANGE
SPECIFICATIONS
17" wide heavy duty expando gas range, Vulcan-Hart Model No.
___________. Stainless steel body and 6" adjustable legs.
11⁄4" diameter front gas manifold.
GHX45
Two 30,000 BTU/hr. heavy cast two piece “Flame Retention”
burners with individual pilots. Total input 60,000 BTU/hr.
Heavy cast iron aeration plates with deep bowls and removable
cast top grates.
GHX60T
3⁄4" polished steel griddle plate with front grease trough and
removable grease collector. 4" side splashers and 5 5⁄8" rear
splasher. Two 20,000 BTU/hr. burners. Pilot ignition system.
Total input 40,000 BTU/hr. Heat absorbent re brick and
griddle leveling bolts.
GHX72
One polished cast iron hot top section measures 17" w x 23 13⁄16"d.
Ceramic re brick under hot top. Two 20,000 BTU/hr. burners.
Total input 40,000 BTU/hr. Pilot ignition system.
Exterior dimensions: 17"w x 39 1⁄8"d x 36" working height.
CSA design certied. NSF listed.
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
GHX45 Two 30,000 BTU/hr. open burners
GHX60T 17" wide griddle top
GHX72 17" wide even heat top
STANDARD FEATURES
Stainless steel body.
11⁄4" diameter front gas manifold.
17" wide cabinet storage base with door.
One year limited parts and labor warranty.
OPTIONS
Stainless steel back nishing panel.
Common front top ledge up to 68" wide. (Not for use on
griddle tops, spreader plates and deep fat fryers.)
Cap and cover manifold end(s). (No charge.)
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 102" wide.
Rear gas connection. (Reference spec sheet F-31525.)
Second year extended limited parts and labor warranty.
Model GHX45 shown Model GHX60T shown Model GHX72 shown
with 17" Backguardwith 17" Backguard
with 17" Backguard

Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specications without notice.
F-32238 (05-06)
GHX SERIES
HEAVY DUTY EXPANDO GAS RANGE
ACCESSORIES
17" high stainless steel backguard. (Common backguards
available up to 102" wide.)
23" high stainless steel single deck high shelf. (Common
high shelves available up to 72" wide.)
35" high stainless steel double deck high shelf. (Common
high shelves available up to 72" wide.)
Additional oven rack(s).
Gas pressure regulator (specify size and type of gas).
Flexible gas hose with quick disconnect and restraining
device. Consult price book for available sizes.
IMPORTANT
1. A gas pressure regulator suitable for battery or single unit
application must be furnished and installed. Natural gas
6.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269. When writing refer to NFPA No. 96.
3. These units are manufactured for installation in accordance
with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.
4. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible construction.
5. For proper ueing a backguard or high shelf must be installed
with each unit. Please refer to spec sheet F31537 for specic
styles and sizes.
6. This appliance is manufactured for commercial installation
only and is not intended for home use.
1
⁄ 8 " 36" 200 lbs./91 kg
1
⁄ 8 " 36" 260 lbs./118 kg
1
⁄ 8 " 36" 250 lbs./113 kg
MODEL NO. OF BURNERS BTU/HR. EA.
BURNER TOTAL BTU/HR. WIDTH DEPTH WORKING HEIGHT APPX. SHP. WT.
GHX45
GHX60T
GHX72
2
2
2
30,000
20,000
20,000
60,000
40,000
40,000
17"
17"
17"
39
39
39