VXI TalkPro Headset User manual

Fold
Fold
Fold
Fold
Fold
Fold
Parrott®
Talkpro
Headset
User Guide
2Choosing a Side
1Connecting Your Headset
to Your PC
Insert the plugs as shown in the drawing. The pink
plug is inserted into the microphone input ( ),
and the lime green plug is inserted into the line
output (speaker) ( ) of the PC sound I/O port.
Part #: 200906A
A/W#: 200907A
Art size: 16" x 5.25"
Fold size: 4" x 5.25"
Color: 1/1 Black
Paper Stock: 65lb. Finch White Opaque Vellum Cover
Determine the side of your head where you
would prefer to locate the microphone. Swivel
the microphone boom as shown.
3
Adjust the headband to fit your head by
sliding it in or out. Swivel to adjust the
position of the microphone boom and
bend the boom so that the microphone
is close to your mouth.
Position the microphone so it is
located one finger-width from
the corner of your mouth,
with the word “TALK”
or a dot facing
your mouth.
Adjustment
TALK

Fold
Fold
Fold
Fold
Fold
Fold
4Parrott Translator™
The VXI Parrott Translator™
provides universal
compatibility between your
headset and any soundcard.
Adding two AA batteries to
the Translator may improve
your headset performance. To
determine whether you need
batteries with your particular sound card,
press the button on the top of the Translator:
LED ON Batteries not needed
LED OFF Add two (2) AA batteries
To install or change the batteries:
1. Turn the Translator over so the bottom is facing you.
2. Push the cover in the direction of the embossed arrow
and ribs to slide the cover off.
3. Install two AA batteries. Slide the cover back on in the
opposite direction.
4. The batteries should be replaced once a year.
To test the batteries for replacement, press the button on
top of the Translator:
LED ON Batteries OK, check in three months
LED OFF Replace batteries
P/N 200906A ©2001 VXI CORPORATION
VXI LIMITED WARRANTY
1. If your VXI headset or amplifier fails to work for any reason during the first two years
from the date of purchase as shown by the purchaser’s warranty registration, VXI will
repair or replace the headset or amplifier, at its election, free of charge. Without
warranty registration, the warranty period begins on the date of manufacture. All
products returned to VXI after the two-year warranty period will be repaired as “out of
warranty” products, and purchaser will be billed for such repairs pursuant to the Out-
of-Warranty Repair provisions set forth below.
2. The obligations of VXI under this warranty shall be limited to repair or replacement
(at our option) of any part returned, freight pre-paid to VXI.
Returned products require a Return Authorization that may be requested from VXI at
800-742-8588 or www.vxicorp.com.
3. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not permit the exclusion of implied warranties and the
foregoing exclusions may not apply to you.
4. In no event shall VXI be responsible for any other damages whatsoever including
direct, indirect, special, incidental, consequential or otherwise for breach of this or any
other warranty, express or implied.
5. Products returned to VXI for Warranty and Out-of-Warranty repairs, freight prepaid
and with proper Returned Authorizations, will be return shipped to the customer at
VXI’s expense within five (5) days of VXI’s receipt of payment.
OUT-OF-WARRANTY REPAIRS
VXI will repair out-of-warranty headsets or amplifiers for a charge of $22.50 each (or such
other charge as may be applicable as of the date of receipt by VXI). See return details
above. Out-of-warranty repairs are warranted to be free from defects in material and
workmanship for ninety (90) days.
If you have headset questions, please contact:
VXI Corporation Technical Support [phone]
Headquarters [phone]
email [email protected]
website www.vxicorp.com