VXI Parrott CP150 User manual

PN 201707B
© 2004 VXI Corporation
VXI LIMITED WARRANTY
1. VXI warrants that your CP150 headset will be free from defects in material and workmanship
for ninety (90) days from the date of purchase. If, during the first ninety days from the date of
purchase, your CP150 headset fails to work due to a defect in material or workmanship, VXI will
repair or replace the product, at its election, free of charge. Without proof of purchase, the
warranty period begins on the date of manufacture.
2. The foregoing limited warranty does not cover equipment failure attributable to accident,
improper operation, misuse, abuse, or any cause other than defects in the materials or
workmanship of VXI's products.
3. VXI's obligations under this warranty are limited to repair or replacement (at our option) of
any defective part returned to VXI, freight prepaid. Returned products require a Return
Authorization that may be obtained by calling customer service at 1-800-742-8588.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties and the
foregoing exclusions may not apply to you.
5. In no event shall VXI be responsible for any other damages whatsoever, including direct,
indirect, special, incidental, consequential, or other damages for breach of this or any other
warranty, express or implied.
6. Products returned to VXI for in-warranty, freight prepaid and with proper Return
Authorization, will be return shipped to the customer at VXI's expense.
For customer service, please call:
VXI Corporation
1-800-742-8588 or 603-742-2888
Technical support is available on our web site at: www.vxiparrott.com
VXI CORPORATION
One Front Street, Rollinsford, NH 03869
603-742-2888 Toll free 1-800-742-8588
e-mail: [email protected] website: www.vxiparrott.com
CP150 HEADSET
For cordless or mobile phones

1. CONNECT HEADSET TO YOUR
CORDLESS OR MOBILE PHONE
For cordless or mobile phones with a compatible
2.5mm jack. insert the 2.5mm plug directly into
the headset jack on the phone.
For mobile phones requiring an adapter, insert the
2.5mm plug into the headset jack on the adapter.
OPERATION
1
6
2
3
45
7
1. Adjustable headband
2. T-Bar
4. Flexible microphone boom
5. Noise canceling microphone
6. 2.5mm connector
7. Rotation point
3. Receiver (Speaker)
COMPONENTS
For customer assistance, please call VXI at 1-800-742-8588 or visit
our website at www.vxiparrott.com.
3. MICROPHONE ADJUSTMENT
Position the microphone so it is located one
finger-width from the corner of your mouth just below
your bottom lip. The microphone has the word TALK or
a painted dot embossed or printed on it (under the
cushion). Be sure that this mark is facing your mouth.
"TALK" or a painted dot
2. CHOOSE A SIDE FOR THE MICROPHONE
AND ADJUST HEADBAND
Determine which side of your head you prefer
to locate the microphone. The microphone
rotates up and over to place the microphone
on the chosen side. The speaker also rotates
to adjust the cord if necessary.
Slide headband in or out of the side support for
best fit.