WAC Lighting AELLA User manual

AELLA
Installation Instructions
works with the
Google Assistant

Please read and instructions
before installation
2

For all questions about your ceiling fan please read all
included instructions, installation procedures, trouble-
shooting guidelines and warranty information before
starting installation
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our tr
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at www.waclighting.com
Email: [e-mail]
1-800-526-2588 option01-800-526-2588 option 3
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
GENERAL INQUIRIES FAN SUPPORT
DO NOT RETURN TO STORE
3

1.
at the circuit breaker before beginning.
2. All wiring must be in accordance with the National Electrical Code“ANSI/
NFPA 70”and local electrical codes. Electrical installation should be per-
formed by a licensed electrician.
3.
fan or other items, the outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35 Ibs (15.9
kg). Use only UL/cUL
listed outlet boxes marked “FOR FAN SUPPORT.” Use only
the screws and washers provided with the outlet box.
4. The fan must be mounted with a minimum of 7 ft. (2.1m)
and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to the
surrounding walls.
5. Never place objects in the path of the fan blades.
6. To avoid personal injury or damage to the fan and
other items, please be cautious when working around
or cleaning the fan.
7. -
ter or chemicals when cleaning the fan or fan blades. A dry cloth or lightly
dampened cloth will be suitable for most cleaning.
8. After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into the outlet box. The wires should be
spread apart with the grounded conductor and the equipment-ground-
ing conductor on one side of the outlet box, and the
ungrounded conductor on the other side of the outlet box.
9. All set screws must be checked and re-tightened where necessary before
installation.
SAFETY RULES
For operation, maintenance, and troubleshooting information, visit http://waclighting.com/fan-support/
4

WARNING: Do not install or use your fan if any part(s) is/are damaged or
missing. This product is designed for use only with the supplied parts and/or
accessories designated for use with this product by WAC. Substitution of parts
or accessories not designated for use with this product by WAC could result
in personal injury or property damage and will void the warranty. Contact an
authorized dealer or the manufacturer if any parts are damaged or missing.
WARNING: To reduce the risk of electric shock, this fan must
be installed and operated with the supplied wall control, or controlled from the
WAC app or Wall Control (not included).
WARNING: Do not use power tools to assemble or install your fan. Using power
tools can result in improper assembly which can lead to noise or fan dam-
age,personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or cleaning the
fan.
WARNING
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place.
Noise and fan damage can occur
WARNING: This appliance is not intended for use by young
children without supervision.
CAUTION: Before assembling your fan, refer to the “Making
the Electrical Connections“ section. If you feel you do not have
enough wiring knowledge or experience, have your fan installed
by a licensed electrican.
NOTE
the circuit breaker.
02 SAFETY RULES
5

This WAC Smart Fan is:
DC
MOTOR
The WAC app synchronizes seamlessly with smart home devices you already own
GET SMART
WALL CONTROL
WC20-WT
Optional accessory
Sold separately
6 fan speeds
Dims light to 1%
ON/OFF
APP DOWNLOAD
Available for purchase on
the Google Pay and App Store
Quiet, reliable, and up to 70%
mor
Wi-Fi and Bluetooth enabled
for unlimited control
Wet Location-listed to the strictest
UL/cUL safety regulations
Compatible with our WAC app
Coordinates with smart devices
for voice-activated control
REMOTE CONTROL
RC20-WT White
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF
6

Package Contents
Mounting Options
Installing the Mounting Bracket
Hanging the Fan
Making the Electrical Connections
Installing the Optional Wall Control
Finishing the Installation
Controlling the Fan
Reset
App Instructions
Accessories
Troubleshooting
9.
10.
12.
12.
13.
15.
17.
20.
23.
24.
26.
27.
4
6
7
8
9
10
11
12
13
5
6
6
TABLE OF CONTENTS
7

F-096L
8
Electrical tape
Phillips screwdriver Step ladder Wire cutters
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
MAC ID
03 TOOLS & MATERIALS REQUIRED
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.

F-096L9
PACKAGE CONTENTS 04
NOTE:
1
A: Junction Box
Machine Screws (2)
Spring Washers (2)
Flat Washers (2)
B: Wall Mounting Fastener
Screws ( )
( )
C: Safety Cable
Flat Washer (1)
Spring Washer (1)
Wood Screw (1)
D: Wire Connectors (8)
(included with receiver)
Hardware Bag
RPL- -PARTS
Remote Control
Hanger Plate
RPL-F096-HGR
RC20-WT
an 2
Blades come pre-attached to the Fan.
Receiver
F-R3-096-022
5

F-096L
10
05 MOUNTING OPTIONS
1
Standard Ceiling Slope Ceiling
CAUTION: To prevent electrical shock, ensure electricity
Figure 1 is an example of how to mount the outlet box.
If needed use Ahardware to mount the outlet box to the ceiling
joist.
To Switch To Switch
(Hot) (Hot)/
Switch
(Ground) (Ground)
(No Neutral)
(Neutral) *Bare or
Green
*Bare or
Green
A
A
B

Use Hardware B
12
A
B
432
UPWARD MOUNTING BRACKET
UNLESS OTHERWISE SPECIFIED:
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
06 HANGING THE FAN
1.
1.
.
.
.
.
Caution: Remember to
disconnect the power at
the circuit breaker.
INSTALLING THE MOUNTING BRACKET
F-096L
1. Fan Body
NOTE: Your blades come pre-attached to the Fan.

A
B
1
UPWARD MOUNTING BRACKET
REV
DWG. NO.
B
SIZE
TITLE:
NAME
DATE
11
0 L
HANGING THE FAN 06
NOTE: A Safety cable is required for all installations in Canada.
Safety cable is required for ceiling fan and light combinations over
5
F-096L

F-096L
06 HANGING THE FAN MAKING THE ELECTRICAL CONNECTIONS
1
outlet box .
Make sure all
connections are made correctly or you will permanently
damage the receiver.
You may also refer to the labels on the receiver wires for
direction on how to make proper connections.
Use DHardware.
WARNING: Failure to connect ground wires could result in
poor fan control functionality.
Connect the red wire from the fan to the red wire marked
“TO MOTOR” from the receiver.
Connect the grey wire from the fan to the grey wire marked
“TO MOTOR” from the receiver.
Connect the yellow wire from the fan to the yellow wire
marked “TO MOTOR” from the receiver.
Connect the white wire from the fan to the white wire
marked “FOR LIGHT” from the receiver.
Connect the blue wire from the fan to the blue wire marked
“FOR LIGHT” from the receiver.
Connect the black (hot) wire from the ceiling to the black
wire marked “ ” from the receiver.
Connect the white (neutral) wire from the ceiling to the white
wire marked “ ” from the receiver.
Black(Hot)
can be RED from Switch leg
Black(Line in H)
GREY(to Motor)
YELLOW(to Motor)
RED(to Motor)
GREEN(Ground)
WHITE(Neutral)
WHITE(Line in N)
GREEN(GND Must Use)
BLUE (to Light)
WHITE(to Light)
GREY(to )
RED(to 
YELLOW(to )
Outlet
Box
Receiver
GREEN(Mounted bracket ground)
 (for Light)
BLUE (for Light)
6

F-096L
1. WARNING: Installation of this fan requires that a
three-conductor cable (including ground and neutral wire)
which should run between ceiling and wall outlet box.
2. WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
3. * Make note of the MAC ID as refrenced prior.
4.
of the receiver facing the ceiling.
7
1
HANGING THE FAN 06
1
2
1. Fan Assembly
2. Receiver

F-096L
15
8
NOTE: Wall control not included. A Bluetooth wall control accessory can be purchased separately. Skip this section if you did not purchase a wall control.
NOTE: For multi-location wiring, skip to the next step.
1. Connect the green wire marked“GROUND” from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3. Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4. Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6. Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7. Fasten the wall plate to the wall mounting plate.
07 INSTALLING THE OPTIONAL WALL CONTROL

F-096L16
1. Install the wall control using the wiring diagram in below.
2. Individually pair each of the wall controls with the fan receiver using the pairing instructions in section 15.
Wall Control 1 Wall Control 2 Wall Control 3
INSTALLING THE OPTIONAL WALL CONTROL 07

F-096L
91. Secure all wire connections with supplied wire ties to assist in
canopy installation.
2. Tuck connections neatly into ceiling outlet box.
3. Slide the motor up to the mounting bracket and place the key
hole on the motor over the screw of the mounting bracket.
4. Turn motor until it locks in place at the narrow section of the
key holes.
5. Note: Make sure the receiver sits at and does not interfere
with the hook iagram 7.
6. Align the circular hole on canopy with the remaining hole on
the mounting bracket. Secure by tightening the two screws
previously loosened and the two screws previously removed.
7. You are now ready to power On and operate your Smart Fan.
17
08 FINISHING THE INSTALLATION

20
0 L
CONTROLLING THE FAN 09
12
A
A
B
B
C
C
Air-Gap
Switch*
Your fan was delivered to you with the included remote already
paired to your fan. You will need to remove the pull-tab to begin
using your remote control.
A:
B:
C: Season (Summer/Winter)
Air-Gap Switch:
Not necessary for normal fan operation.
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
10 11
Pairing
Press and hold buttons
for 10-15 seconds.
Optional
Wall Control
* Air-Gap Switch only
included with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
NOTE: Your fan features 6 speeds. An audible tone will indicate when
the speed is increased or decreased. When the fan has reached the
minimum/maximum speed level the fan will beep twice.
NOTE: Pairing must be completed within 3 minutes of turning the
power on to the fan receiver. If you wish to pair your remote to another
WAC Smart Fan or if you ever need to re-pair your remote to its original
fan, press and hold the light toggle and fan toggle for 4 seconds until
you hear a short beep, long beep combination from the fan.
F-096L

F-096L
21
Breeze Mode
1. Breeze Mode mimics the natural ebb and flow of winds in
nature by varying the fan speed.
NOTE: Breeze Mode always rotates your fan in the Summer
(CCW) direction
2. To start Breeze Mode, press and for 4 seconds. The
LED will blink green and the fan will beep.
3. To exit Breeze Mode and return to standard fan mode,
press and for 4 seconds. The led will blink green and
the fan will beep. Your fan will return to the direction and
speed it was set to prior to entering Breeze Mode.
Controlling Multiple Fans with Remote or Wall Controls
Your remote and wall controls are capable of controlling
multiple fans. A remote or wall control has the ability to control
an unlimited number of fans with the only limitation being the
Bluetooth® range of the control and fans you want to have on
the same controller. Power down the target fans circuit for 30
seconds and then turn it back on. Hold the fan and light button
for 10-15 seconds until you hear an audible beep from each fan.
NOTE: Fans you do not wish to have on the same controller
should remain powered down or wait for the 3 minute pairing
windo
Pairing a remote control or wall control to an additional fan(s)
can be performed in the same manner as described in the
pairing section.
NOTE: Pairing must be completed within three (3) minutes of
powering the fan.
Synchronizing Control Across Multiple Fans
If you are controlling more than one fan with a remote control,
there is a possibility that their light state, fan state or fan
direction can get out of sync. To bring the fans/lights back
into sync please follow the instructions on the next page.
09 CONTROLLING THE FAN

F-096L22
13
Press and hold
Ligh Press and hold to
Fan Direction: Press and hold beep to
indicate the message has been received. All fans will be set to summer mode (CCW rotation). This will bring all fans controlled by the
remote into sync.
Press and hold
button for 4 seconds.
Press and hold
button for 4 seconds.
Fan Direction
Press and hold
button for 4 seconds.
CONTROLLING THE FAN 09