WAC Lighting MOCHA User manual

MOCHA
Installation Instructions
works with the
Google Assistant
Compatible with

Please read and save these
instructions before installation

For all questions about your ceiling fan please read all
included instructions, installation procedures, trouble-
shooting guidelines and warranty information before
starting installation
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our trained technical sta at:
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at www.waclighting.com
Email: [e-mail]
1-800-526-2588 option 01-800-526-2588 option 3
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
GENERAL INQUIRIES FAN SUPPORT
DO NOT RETURN TO STORE

SAFETY RULES
To reduce the risk of electric shock, ensure electricity has been turned o at
the circuit breaker before beginning.
All wiring must be in accordance with the National Electrical Code“ANSI/
NFPA 70” and local electrical codes. Electrical installation should be
performed by a licensed electrician.
The fan must be mounted with a minimum of 7 ft. (2.1m)
clearance from the trailing edge of the fan blades to the oor
and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to the
surrounding walls.
Never place objects in the path of the fan blades.
To avoid personal injury or damage to the fan and
other items, please be cautious when working around
or cleaning the fan.
To avoid electrical shock or damage to the motor or nish, do not use water
or chemicals when cleaning the fan or fan blades. A dry cloth or lightly
dampened cloth will be suitable for most cleaning.
After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into the outlet box. The wires should be
spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box, and the ungrounded conductor on
the other side of the outlet box.
All set screws must be checked and re-tightened where necessary before
installation.
For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/

02 SAFETY RULES
WARNING: Do not install or use your fan if any part(s) is/are damaged or
missing. This product is designed for use only with the supplied parts and/
or accessories designated for use with this product by Modern Forms.
Substitution of parts or accessories not designated for use with this product
by Modern Forms could result in personal injury or property damage and will
void the warranty. Contact an authorized dealer or the manufacturer if any
parts are damaged or missing.
WARNING: To reduce the risk of electric shock, this fan must
be installed and operated with the supplied wall control, or controlled from
the Modern Forms app or Wi-Fi Touch Panel
Wall Control (not included).
WARNING: Do not use power tools to assemble or install your fan. Using
power tools can result in improper assembly which can lead to noise or fan
damage,personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or cleaning
the fan.
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place.
Noise and fan damage can occur
WARNING: This appliance is not intended for use by young
children without supervision.
WARNING: To reduce the risk of re, electric shock, personal injury or damage
to the fan or other items, the outlet box and support structure must be
securely mounted and capable of reliably supporting a minimum of 35 Ibs
(15.9 kg). Use only UL/cUL listed outlet boxes marked “FOR FAN SUPPORT.” Use
only the screws and washers provided with the outlet box.
CAUTION: Before assembling your fan, refer to the “Making
the Electrical Connections“ section. If you feel you do not have
enough wiring knowledge or experience, have your fan installed
by a licensed electrican.
NOTE: Before servicing or cleaning the fan, switch power o at
the circuit breaker.

All WAC Smart Fans are:
DC
MOTOR
The WAC app synchronizes seamlessly with smart home devices you already own
GET SMART
works with the
Google Assistant
WALL CONTROL
WC20-WT
Optional accessory
sold separately
6 fan speeds
Dims light to 1%
ON/OFF
APP DOWNLOAD
Available for purchase on
the Google Pay and App Store
Quiet, reliable, and up to 70%
more ecient than AC motor fans
Wi-Fi and Bluetooth enabled
for unlimited control
Wet location-listed to the strictest
UL/cUL safety regulations
Compatible with our WAC app
Coordinate with smart devices
for voice-activated control
REMOTE CONTROL
RC20-WT White
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF

Package Contents
Mounting Options
Installing the Mounting Bracket
Attaching the Fan Blades
Hanging the Fan
Making the Electrical Connections
Installing the Wall Control
Finishing the Installation
Installing the Luminaire Module
Controlling the Fan
Factory Reset
App Instructions
Accessories
9.
10.
10.
11.
12.
14.
15.
17.
18.
20.
23.
24.
26.
4
7
8
9
10
11
12
13
14
15
5
5
6
TABLE OF CONTENTS

F-001
8
Electrical tape
Phillips screwdriver Step ladder Wire cutters
03 TOOLS & MATERIALS REQUIRED
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
Hanging Weight: 17lbs
MAC ID
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.

9F-001
NOTE: ** denotes nish code of fan
1
10
7
3
4
9
15
6
5
14
2
8
11
12
13
Blade Collector
Ring
Canopy Ring
RPL-CAN-RND-**
Adapter Plate
(Optional)
Luminaire Cover
RPL-F001-COVER-**
Coupling
Cover
Safety Cable
5.4mm Spring
Washers (2pcs)
Safety Cable
5/32” Spring
Washers (2pcs)
Safety Cable
10 x 4mm x 0.8
Flat Washers (2pcs)
Hardware Bag
RPL-F001-PARTS
Hanger Bracket
8 x 3/4 Machine
Screws (2pcs)
Hanger Bracket
12 x 11W x 2 Self-
Tapping Screws (2pcs)
Blade Arm & Blade
1/4” x 18mm Blade
Screws (10pcs)
Blade Arm & Blade
Blade Press Plates (3pcs)
Canopy
RPL-CAN-RND-**
Motor Housing
Fan Blade
RPL-F001-54-**
Remote Control
RC20-WT
PACKAGE CONTENTS 04
Downrod
Assembly
RPL-HGR-ASM-**
Mounting
Bracket
RPL-HGR-ASM-**
Glass Shade
(Optional)
RPL-F001-GLA
Luminaire Module
(Optional)
F-001-LED-**
Receiver
F-R3-001-054

F-001
10
1 2
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET
Remove 1 set screw from mounting bracket and set aside
for use in Finishing the Installation.
Pass supply wires through mounting bracket and secure
to outlet box.
Standard Ceiling Slope Ceiling Caution: Remember to disconnect
the power at the circuit breaker.
CAUTION: To prevent electrical shock, ensure electricity
has been turned o at the circuit breaker before beginning.
Figures 1 and 2 are examples of dierent ways to mount the
outlet box.

11F-001
31. Place blade on motor and secure with the blade attachment,
screws and washers.
2. Insert blades in slots, aligning with motor assembly holes.
3. Secure blades with blade attachment screws & washers.
4. Remove set screws from motor housing, install blade collector
ring (when applicable), and re-install screws.
ATTACHING THE FAN BLADES 06

F-001
12
41. Remove screw from hanger ball. Remove hanger ball and cross pin.
2. Loosen 2 screws, clevis pin and cotter pin.
3. Install coupling cover, canopy screw ring, canopy and downrod
assembly into motor housing as shown.
07 HANGING THE FAN

13F-001
5 6
HANGING THE FAN 07
1. Align downrod and motor collar holes, re-insert
pins and screws.
2. Slip up canopy and canopy screw cover. Re-install hanger ball
with cross pin in correct place.
1. Seat all into the mounting bracket. Rotate until ball drops
and locks into hanger bracket screw.
2. Secure safety cable to structure.

F-001
14
7
White (neutral)
Outlet Box
Black (hot)
Black (“AC IN L”)
Red (to motor)
Gray (to motor)
Yellow (to motor)
Yellow (motor)
Gray (motor)
Red (motor)
Receiver
Green (ground)
To Hanger Ball
Green (ground)
To Hanger Bracket
Green (ground)
White (for light)
White (for light)
Blue (for light)
Blue (for light)
White (“AC IN N”)
Green (ground)
08 MAKING THE ELECTRICAL CONNECTIONS
1. Connect the wires from fan to the corresponding wires
on the receiver.
2. Connect the wires from the outlet box to the corresponding
wires on the receiver.
NOTE: Follow wiring diagram found on the receive hardware.
After making electrical connections, spliced connectors should be
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and
ungrounded connector on the other side of the outlet box.

15F-001
WHITE WHITE
RED
BLACK
GREEN (GROUND)
BLACK (TO FAN)
COPPER
GROUND
WHITE
(NEUTRAL)
BLACK (FROM BREAKER)
WALL CONTROL
WALL OUTLET BOX
8
INSTALLING THE WALL CONTROL 09
NOTE:Wall control not included. A Bluetooth wall control accessory can be purchased separately.
NOTE: For multi-location wiring, skip to the next step.
1. Connect the green wire marked“GROUND”from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3. Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4. Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6. Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7. Fasten the wall plate to the wall mounting plate.

F-001
16
1. Install the wall control using the wiring diagram above.
2. Individually pair each of the wall controls with the fan receiver using the pairing instruction.
Wall Controller 1 Wall Controller 2 Wall Controller 3
if Applicable
Green
Green to Fan
Black to Fan
White to Fan
Green White Black Red
Black Black White Red Red White Green Green
HOT IN
09 INSTALLING THE WALL CONTROL

17F-001
Screws
Outlet box
Hanger
Bracket
Canopy
Canopy Screw Cover
FINISHING THE INSTALLATION 10
91. Secure wire connectors with supplied wire ties.
2. Install canopy to mounting bracket with the screw
removed in section 2.
3. Install canopy screw ring as shown.

F-001
18
16
When installing the Non-Luminaire version (F-003)
11 INSTALLING THE COVER
1. Install luminaire cover without over-tightening.
10

19F-001
11
INSTALLING THE LUMINAIRE MODULE 11
When installing the Luminaire version (F-003L)
12
1. Install glass shade without over-tightening.1. Secure the luminaire module with the 3 screws to the
adapter plate.

F-001
20
15
A
B
CAir-Gap
Switch*
12 CONTROLLING THE FAN
Your fan is pre-paired. If you need to pair your fan refer to
step 14.
A: Light On/O, Bright/Dim +/- B: Fan On/O, Fan Speed +/-
C: Reverse Button (Summer and Winter Modes)
Air-Gap Switch: Pull tab to power o in case of emergency.
Not necessary for normal fan operation (only included with
wall control).
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
13 14
Pairing
Press and hold buttons
for 10-15 seconds.
Wall Control
* Air-Gap Switch only included
with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
NOTE: Your fan features 6 speeds. An audible tone will indicate
when the speed is increased or decreased. When the fan has
reached the minimum/maximum speed level the fan will beep twice
NOTE: Pairing must be completed within 3 minutes of turning the
power on to the fan receiver.