WAC San Francisco Flush User manual

SAN FRANCISCO FLUSH
Installation Instructions
works with the
Google Assistant

Please read and save instructions
before installation
2

For all questions about your ceiling fan please read all
included instructions, installation procedures, trouble-
shooting guidelines and warranty information before
starting installation
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our trained technical sta at:
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at www.waclighting.com
Email: [e-mail]
1-800-526-2588 option 01-800-526-2588 option 3
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
GENERAL INQUIRIES FAN SUPPORT
DO NOT RETURN TO STORE
3

1. To reduce the risk of electric shock, ensure electricity has been turned o
at the circuit breaker before beginning.
2. All wiring must be in accordance with the National Electrical Code “ANSI/
NFPA 70” and local electrical codes. Electrical installation should be per-
formed by a licensed electrician.
3. To reduce the risk of re, electric shock, personal injury or damage to the
fan or other items, the outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35 Ibs (15.9
kg). Use only UL/cUL
listed outlet boxes marked “FOR FAN SUPPORT.” Use only
the screws and washers provided with the outlet box.
4. The fan must be mounted with a minimum of 7 ft. (2.1m)
clearance from the trailing edge of the fan blades to the oor
and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to the
surrounding walls.
5. Never place objects in the path of the fan blades.
6. To avoid personal injury or damage to the fan and
other items, please be cautious when working around
or cleaning the fan.
7. To avoid electrical shock or damage to the motor or nish, do not use wa-
ter or chemicals when cleaning the fan or fan blades. A dry cloth or lightly
dampened cloth will be suitable for most cleaning.
8. After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into the outlet box. The wires should be
spread apart with the grounded conductor and the equipment-ground-
ing conductor on one side of the outlet box, and the
ungrounded conductor on the other side of the outlet box.
9. All set screws must be checked and re-tightened where necessary before
installation.
SAFETY RULES
For operation, maintenance, and troubleshooting information, visit http://waclighting.com/fan-support/
Hanging Weight:
F-082L: 14 LBS
F-084L: 13.5 LBS
4

WARNING: Do not install or use your fan if any part(s) is/are damaged or
missing. This product is designed for use only with the supplied parts and/or
accessories designated for use with this product by WAC. Substitution of parts
or accessories not designated for use with this product by WAC could result
in personal injury or property damage and will void the warranty. Contact an
authorized dealer or the manufacturer if any parts are damaged or missing.
WARNING: To reduce the risk of electric shock, this fan must
be installed and operated with the supplied wall control, or controlled from the
WAC app or Wall Control (not included).
WARNING: Do not use power tools to assemble or install your fan. Using power
tools can result in improper assembly which can lead to noise or fan dam-
age,personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or cleaning the
fan.
WARNING: To reduce the risk of fire , Electric shock , or personal injury, Mount
to outlet box marked "acceptable for fan support of 15.9kg (35 Ibs ) or less "
and use mounting screws with the outlet box .
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place.
Noise and fan damage can occur
WARNING: This appliance is not intended for use by young
children without supervision.
CAUTION: Before assembling your fan, refer to the “Making
the Electrical Connections“ section. If you feel you do not have
enough wiring knowledge or experience, have your fan installed
by a licensed electrican.
NOTE: Before servicing or cleaning the fan, switch power o at
the circuit breaker.
02 SAFETY RULES
5

This WAC Smart Fan is:
DC
MOTOR
The WAC app synchronizes seamlessly with smart home devices you already own
GET SMART
works with the
Google Assistant
WALL CONTROL
WC20-WT
Optional accessory
Sold separately
6 fan speeds
Dims light to 1%
ON/OFF
APP DOWNLOAD
Available for purchase on
the Google Pay and App Store
Quiet, reliable, and up to 70%
more ecient than AC motor fans
Wi-Fi and Bluetooth enabled
for unlimited control
Wet Location-listed* to the strictest UL/
cUL safety regulations
Compatible with our WAC app
Coordinates with smart devices
for voice-activated control
REMOTE CONTROL
RC20-WT White
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF
6

Package Contents
Mounting Options
Installing the Mounting Bracket
Attaching the Fan Blades
Hanging the Fan
Making the Electrical Connections
Installing the Optional Wall Control
Finishing the Installation
Installing the Adapter Plate
Installing the Luminaire Module
Controlling the Fan
Reset
App Instructions
Accessories
Troubleshooting
9.
10.
10.
11.
12.
14.
16.
18.
19.
20.
20.
24.
25.
27.
29.
4
7
7
8
9
10
11
12
13
14
15
16
5
5
6
TABLE OF CONTENTS
7

F-082L/ F-084L
8
Electrical tape
Phillips screwdriver Step ladder Wire cutters
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
MAC ID
03 TOOLS & MATERIALS REQUIRED
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.

9
F-082L/ F-084L
PACKAGE CONTENTS 04
NOTE: ** denotes nish code of fan / blade sweep
13
6
2
5
4
9
7
810
A: Junction Box
Machine Screws (2)
Spring Washers (2)
Flat Washers (2)
B: Blade Arm and Blade
Blade Screws (10)
Nylon Washers (10)
C: Safety Cable
Flat Washer (1)
Spring Washer (1)
Wood Screw (1)
D: Wire Connectors (8)
(included with receiver)
Adapter Plate
Hardware Bag
RPL-FHSANFRAN-PART
Motor
Housing
Fan Blade
RPL-FSFRAN-**BD-**
Remote Control
RC20-WT
Hanger Plate
RPL-FSANFRAN-HGR-**
Trim
Ring - Decorative
RPL-FSFRAN-TRIM-**
Glass Shade
RPL-FSANFRAN-GLASS
Luminaire Module
F4IN-120V-R1-30
Receiver
F-R3-082-052 for 52 inch
F-R3-084-044 for 44 inch
RPL-FSFRAN-ADP-**

F-082L/ F-084L
10
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET
12
1. Disconnect power at the breaker to the fan location. A
licensed electrician must install the fan.
2. Secure the mounting bracket to the ceiling outlet box with
the screws and washers provided with your outlet box.
3. Pass the 120-volt supply wires through the center hole in
the ceiling mounting bracket as shown in.
Standard Ceiling Slope Ceiling
Caution: Remember to disconnect
the power at the circuit breaker.
CAUTION: To prevent electrical shock, ensure electricity
has been turned o at the circuit breaker before beginning.
Figure 1 is an example of how to mount the outlet box.
If needed use Ahardware to mount the outlet box to the ceiling
joist.
To Switch To Switch
(Hot) (Hot)/
Switch
(Ground) (Ground)
(No Neutral)
(Neutral) *Bare or
Green
*Bare or
Green
AA
B
2
1
3
4
1.120VWires
2. cUL Listed Electrical Box
3. Mounting Plate
4. Mounting Screws
(supplied with outlet box)

1. Insert the blade through the slot in the housing. Align the
holes in the blade with the fan motor assembly holes and
secure with blade attachment screw with rubber washers
Use Bhardware.
2. Repeat this procedure for the remaining blades.
11
F-082L/ F-084L
3
ATTACHING THE FAN BLADES 06

5
F-082L/ F-084L
12
4
1. Screws
2. Top Assembly
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UPWARD MOUNTING BRACKET
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5
WEIGHT:
REV
DWG. NO.
B
SIZE
TITLE:
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ON
NEXT ASSY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
07 HANGING THE FAN
3. Lift the motor assembly and hang it on the hook of the
mounting bracket with the safety cable attached to the motor
housing.
1. Wood Screw
2. Safety Cable
3. Trim Ring
1
23
35 lbs. in both ush and downrod models in the United States.
4. Secure the safety cable to the building structure using spring washer,
flat washer, and wood screw provided. Use C hardware
NOTE: A Safety cable is required for all installations in Canada.
Safety cable is required for ceiling fan and light combinations over
1. Remove 2 opposing screws of 4 screws and save for use in
the Finishing the Installation Section 9. Loosen the others .
2. Leave the trim ring around the motor assembly. You will
twist it on to the Fan housing in Section 9.

07 HANGING THE FAN MAKING THE ELECTRICAL CONNECTIONS
F-082L/ F-084L
13
1. Connect the ground wire from the mounting bracket, the
outlet box, and the receiver, all together. Continue to make
all other connections per Diagram 6. Make sure all
connections are made correctly or you will permanently
damage the receiver.
You may also refer to the labels on the receiver wires for
direction on how to make proper connections.
Use DHardware.
WARNING: Failure to connect ground wires could result in
poor fan control functionality.
2. Connect the red wire from the fan to the red wire marked
“TO MOTOR” from the receiver.
3. Connect the grey wire from the fan to the grey wire marked
“TO MOTOR” from the receiver.
4. Connect the yellow wire from the fan to the yellow wire
marked “TO MOTOR” from the receiver.
5. Connect the white wire from the fan to the white wire
marked “FOR LIGHT” from the receiver.
6. Connect the blue wire from the fan to the blue wire marked
“FOR LIGHT” from the receiver.
7. Connect the black (hot) wire from the ceiling to the black
wire marked “LINE IN HOT ” from the receiver.
8. Connect the white (neutral) wire from the ceiling to the white
wire marked “LINE IN NEUTRAL” from the receiver.
Black(Hot)
can be RED from Switch leg
Black(Line in H)
GREY(to Motor)
YELLOW(to Motor)
RED(to Motor)
GREEN(Ground)
WHITE(Neutral)
WHITE(Line in N)
GREEN(GND Must Use)
BLUE (to Light)
WHITE(to Light)
GREY(to Receiver)
RED(to Receiver)
YELLOW(to Receiver)
Outlet
Box
Receiver
GREEN(Mounted bracket ground)
WHITE (for Light)
BLUE (for Light)
6

1. WARNING: Installation of this fan requires that a
three-conductor cable (including ground and neutral wire)
which should run between ceiling and wall outlet box.
2. WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
3. * Make note of the MAC ID as refrenced prior.
4. Insert the receiver into the mounting bracket with the at side
of the receiver facing the ceiling.
7
14
F-082L/ F-084L
HANGING THE FAN 07
1
3
2
1. Motor Assembly
2. Receiver
3. Trim Ring

F-082L/ F-084L
15
8
NOTE:Wall control not included. A Bluetooth wall control accessory can be purchased separately. Skip this section if you did not purchase a wall control.
NOTE: For multi-location wiring, skip to the next step.
1. Connect the green wire marked“GROUND” from the wall control to the copper wire from the wall outlet box that
feeds back to the circuit breaker – important for proper fan function.
2. Connect the black wire marked “LINE IN” from the wall control to the black LINE VOLTAGE wire from the wall
outlet box that feeds back to the circuit breaker.
3. Connect the red wire from the wall control to the black wire from the wall outlet box that feeds up to the fan.
4. Connect the white wire from the wall control to the white (neutral) wire from the wall outlet box.
5. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the two (2) wall control screws provided.
6. Attach the wall mounting plate over the wall switch and secure with the two (2) wall mounting plate screws provided.
7. Fasten the wall plate to the wall mounting plate.
08 INSTALLING THE OPTIONAL WALL CONTROL

16
F-082L/ F-084L
1. Install the wall control using the wiring diagram in below.
2. Individually pair each of the wall controls with the fan receiver using the pairing instructions in section 15.
Wall Control 1 Wall Control 2 Wall Control 3
INSTALLING THE OPTIONAL WALL CONTROL 08

9
1. Screws
2. Mounting Bracket
3. Trim Ring
4. Motor
1. Secure all wire connections with supplied wire ties to assist in
canopy installation.
2. Tuck connections neatly into ceiling outlet box.
3. Slide the motor up to the mounting bracket and place the key
hole on the motor over the screw of the mounting bracket.
4. Turn motor until it locks in place at the narrow section of the
key holes.
5. Note: Make sure the receiver sits flat and does not interfere
with the hook per Diagram 7.
6. Align the circular hole on canopy with the remaining hole on
the mounting bracket. Secure by tightening the two screws
previously loosened and the two screws previously removed.
7. Raise up trim ring and line up the 4 tabs with the 4 grooves
on the mounting bracket. Once lined up, slide the trim ring
and secure it to the canopy until snug.
F-082L/ F-084L
17
09 FINISHING THE INSTALLATION

1. Mounting Ring
2. Adapter Plate
3. Screw
3
2
1
18
F-082L/ F-084L
10
INSTALLING THE ADAPTER PLATE 10
1. Remove one of the three mounting plate screws from the
mounting ring and loosen the other two screws (do not
remove).
2. Place the key holes in the mounting plate over the two screws
previously loosened from the mounting ring. Turn the
mounting plate until the adapter plate locks in place at the
narrow section of the key hole.
3. Tighten the two mounting ring screws
previously loosened and the one previously
removed to secure adapter plate.

F-082L/ F-084L
19
1. Remove 1 screw from the adapter plate for future use and
loosen the two others from the outer perimeter of the adapter
plate and keep for future use.
2. Raise and hold the LED luminaire module close to the mount-
ing plate and proceed to secure the wire connections. Connect
the white wire connectors from the luminaire module to the
white wire of the fan. Connect the blue wire from the fan to
the blue wire from the LED module.
3. Tuck connections neatly into adapter plate. Place the luminaire
module/plate and twist into key lock position. Tighten the two
loosened screws and screw in the previsouly removed screw.
against the adapter plate.
4. Raise glass shade up against the luminaire module,
and secure it to fan by turning glass clockwise until snug.
11 INSTALLING THE LUMINAIRE MODULE/GLASS
11
1. Adapter Plate
2. LED Luminaire Module
2
1
12
1. Glass Shade
1

20
F-082L/ F-084L
CONTROLLING THE FAN 12
15
A
A
B
B
C
C
Air-Gap
Switch*
Your fan was delivered to you with the included remote already
paired to your fan. You will need to remove the pull-tab to begin
using your remote control.
A: Light On/O, Bright/Dim
B: Fan On/O, Speed Up/Down
C: Season (Summer/Winter)
Air-Gap Switch: Pull tab to power o in case of emergency.
Not necessary for normal fan operation.
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
13 14
Pairing
Press and hold buttons
for 10-15 seconds.
Optional
Wall Control
* Air-Gap Switch only
included with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
NOTE: Your fan features 6 speeds. An audible tone will indicate when
the speed is increased or decreased. When the fan has reached the
minimum/maximum speed level the fan will beep twice.
NOTE: Pairing must be completed within 3 minutes of turning the
power on to the fan receiver. If you wish to pair your remote to another
WAC Smart Fan or if you ever need to re-pair your remote to its original
fan, press and hold the light toggle and fan toggle for 4 seconds until
you hear a short beep, long beep combination from the fan.