WALDIS CAWI 7215 User manual

www.tresore.ch
OPERATING INSTRUCTIONS
SAFE LOCK
CAWI 7215
Electronic door lock for WA safes
Issue 08.2020

Thank you very much ❤
We would like to thank you for choosing Waldis when it comes to safety.
When buying a safe, you have chosen a product tested according to EN1143-1. A
Swiss quality product with VdS - tested security.
Please read these instructions carefully before commissioning your safe!
Your contact for questions
WALDIS Tresore AG
Hofwisenstrasse 20
CH-8153 Rümlang
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]

Table of contents
Safe lock ................................................................................................................ 1
1.1. General notes .................................................................................................. 1
1.1.1. Closed position ......................................................................................... 1
1.1.2. Opening the lock ....................................................................................... 1
1.1.3. Closing the lock......................................................................................... 2
Code Programming ................................................................................................ 3
1.2. Code programming menu................................................................................ 3
Power supply.......................................................................................................... 4
3.1. General............................................................................................................ 4
Password ............................................................................................................... 5
4.1. General basic rules.......................................................................................... 5
4.1.1. Avoid obvious passwords.......................................................................... 5
4.1.2. Tips ........................................................................................................... 5
4.1.3. Last but not least....................................................................................... 5

1
Safe lock
1.1. General notes
1.1.1. Closed position
= Move to the "OPEN" position. (Turn in the direction of the arrow to open
the safe).
1.1.2. Opening the lock
First turn the opening rotary handle to the closed position. This relieves the load
on the lock bolt.
The factory code is C-0-1-2-3-4-5-6
Procedure
1. The lock is in "sleep position" and must first be activated by pressing key C
(approx. 2 seconds)
2. Enter the correct opening code (for initial start-up C0 1 2 3 4 5 6), the green
LED flashes 1 time and the high-low signal tone sounds
3. If the opening rotary handle is not turned clockwise to the open position within
10 seconds, the lock is secured again
4. Turn the opening rotary handle clockwise to the open position and pull the
door open - If the door or the bolt mechanism remains open for longer than 10
seconds, the lock beeps 10 times to indicate that it is in a pretension position
5. Each keystroke is acknowledged with a "beep", pauses longer than 5 seconds
delete the previous entry; or if an incorrect code entry is made, the entry can
be deleted with the "C" key.
6. If an incorrect entry is made, the red LED lights up and a high-pitched signal
tone sounds 12 times. After 3 incorrect entries, the lock is blocked for approx.
12 secondsEach
further incorrect entry extends the blocking time by an additional 12
secondsDuring the blocking
time, the red LED flashes every 5 seconds. The end of the locking period is
indicated
by the green LED lighting up and a low-high signal tone.
7. After the expiration of any lockout time, the correct code must be entered and
the lock can be opened

2
1.1.3. Closing the lock
Close the safe door. Turn the opening handle counterclockwise to the closed
position (horizontal). The lock closes automatically and is thus secured.

3
Code Programming
1.2. Code programming menu
ATTENTION: All code reprogramming must be carried out with the door
open!
Edit from point to point, always within 10 seconds
Procedure
1. Open door and press keys immediately
2. previous code, e.g. 1 2 3 4 5 6 and enter (factory code)
3. new code e.g. 1 1 2 2 and enter
4. again new code 1 1 2 2 and enter
Important: For security reasons, you should change the factory code immediately
after delivery. Please do not use your own birthday or similar known data.
Please close the bolt work with the door open and open the lock 2-3 times with the
newly programmed code.

4
Power supply
3.1. General
If the battery voltage is insufficient, after entering the opening code, a high-pitched
warning tone is emitted 10 times and the red and green LEDs flash alternately 10
times. The battery should be replaced within the next few days.
The lock is powered by a 9V ALKALINE block battery.
After changing the battery, enter the valid opening code 00 X X X X X. A
triple beep signal then sounds, enter opening code 00 X X X X X X again and
the lock opens.

5
Password
4.1. General basic rules
4.1.1. Avoid obvious passwords
•No trivial values like 000000, 0815, 123456
•Do not use your own birthday, car license plate, phone number or name (your
own, wife/husband, children, pets, company, place of residence, etc.) as
password. Do not use standard passwords like: "password" or "safe".
•Writing backwards is also too easy
•Do not use a password that you already use
•Important passwords should not have a logical structure
4.1.2. Tips
•The first rule: A password is only secure if it remains secret!
•Remember passwords - don't write them down anywhere!
•Consider all keys if possible (wear marks on the keyboard betray the individual
numbers over time)
4.1.3. Last but not least
Consider how the password will still be retained if the owner can no longer
disclose the password (e.g., in the event of death). Leave a sealed envelope with
your notary.

Notes
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________