Walker Edison AF42TILOVCT User manual

P.1
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Revised 23/10/2020(C)
Walker Edison
TM
AF42TILOVCT
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.

GeneralAssembly Guidelines
I.Ensurethatallpartsandhardwareareavailablebeforebeginning assembly.
II.Followeachstepcarefullytoensuretheproperassembly of this product.
III.Twopeoplearerecommendedfor easeintheassembly of this product.
IV.Themain typeofhardwareusedtoassemble thisproductare: bolts and screws.
V.Powertoolsshouldnotbeusedtoassemblethis product.
P.2
VI.Drillmaybeneededforsecuringproduct towall.
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.

P.3
Parts List
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
2
3
4
4
44

P.4
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
Philipsheadscrewdriverrequiredforassembly
(notincluded)
M6x15mm BoltA 20 pcs
B 1 pc
RubbersuctioncupsC 4 pcs
M4 Hexkey
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.

P.5
Step 1
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
3
4
4
4
A
B
Using bolt (A) attach part (3) to part (4) with Hex key (B) as per diagram.
Note: Please do not fully tighten all bolts at this step .

P.6
Step 2
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
4
4
4
AA
AA
AA
B
Using bolt (A) attach part (4) to part (1) with Hex key (B) as per diagram.
Note: Please do not fully tighten all bolts at this step .

Step 3
P.7
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
3
C
C
C
C
Insert Rubber suction cups (C) into part (3) as per diagram.

Step 4
P.8
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
2
Place part (2) on the top of part (3) carefully as per diagram.

Step 5
P.9
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
3
4
AB
Using bolt (A) attach part (3) to part (4) with Hex key (B) as per diagram.
Note: Please do not fully tighten all bolts at this step .

Step 6
P.10
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
4
A
B
Using bolt (A) attach part (4) to part (1) with Hex key (B) as per diagram.
Note: Fully tighten all bolts at this step .