Walker Edison BTOTMPBL User manual

Item # : BTOTMPBL
Assembly Instructions
  
 
Revised 03/2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Secure parts together using the hardware as shown in the diagram. Tighten securely with
wrench (G).
Secure bed supports (12) as shown in the diagram. Tighten securely with wrench (G).

Place support legs (6) and secure with hardware as shown. Tighten securely with wrench (G).
Place parts (1) and (2) and secure with hardware as shown. Tighten securely with wrench (G).

Secure parts together using the hardware as shown in the diagram. Tighten securely with
wrench (G).

Secure bed supports (12) as shown in the diagram. Tighten securely with wrench (G).
Secure parts together using the hardware as shown in the diagram. Tighten securely with
wrench (G).

Secure parts together using the hardware as shown in the diagram. Tighten securely with
wrench (G).
Secure parts together using the hardware as shown in the diagram. Tighten securely with
wrench (G).

Loosen and remove the ladder (11) from the bed frame.
Loosen and remove the open guardrail (4,5) from the bed frame.

Loosen bolts where upper bunk connects with lower bunk.
Lift and separate the bunks and the support posts (6).

Attach plastic end caps (13) as shown in the illustration.