Walker Edison W70UBC22 User manual

Item # :W70UBC22
Assembly Instructions
  
 
Revised 03/2017
Copyright © 2013, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Use wrench (N), bolt (R) to secure the side frame (20) to the side panel (2,3).
Disassemble keyboard tray slider (T) by sliding the tray arm and tray bracket apart. Depress
the small lever of the tray bracket and carefully pull the two pieces apart. Repeat this process
for both keyboard tray sliders (T).

Secure screw (S) to the tray bracket of keyboard tray slider (T) to the drawer side panel (16,17).
Secure screw (S) to the tray arm of keyboard tray slider (T) to the side panel (2,3) and middle
side panel (4,5).

Secure cam bolts (B) and insert wooden dowels (A) into top panel (1).
Insert wooden dowels (A) into bottom panel (8) and support bars (6,7).

Secure cam bolts (B) into panels (2,3,4,5). Insert wooden dowels (A) into panels (4,5).
Attach drawer handle (G) using bolts (H) and secure cam bolts (B) into drawer panels (14).

Secure legs (9) to bottom panel (8) using screws (M).
Attach side panel (4) to top panel (1) using cam locks (C).

Attach side panel (5) to top panel (1) using cam locks (C).
Attach side panel (5) to top panel (1) using cam locks (C).