Wasserstein 2 in 1 - Solar Charger & Security Light User manual

2 in 1 - Solar Charger & Security Light
Compatible with Ring Spotlight Cam Battery and
Ring Stick Up Cam Battery
User Manual

Table of Contents
Package Includes 2
Safety Information 2
Features 2
Best Practices to Optimize Motion Detection 3
Pre - Installation 4
Mounting the Solar Spotlight Charger 4
Connecting to a Security Camera 5
Charging Time 5
Important Notes 5
FAQ 6
Specications 6
Page 1 - 6
Need help? Send us an email at: [email protected]om

Package Includes
Safety Information
Page 2 - 6
Need help? Send us an email at: [email protected]om
∙1 x Solar Spotlight Charger
∙1 x Charging Cable
∙2 x Screws
∙2 x Anchors
∙1 x User Manual
∙Keep the Solar Spotlight Charger away from high temperatures to avoid leakage or
combustion of the internal battery. Do not mount it near chimneys, exhausts, air
conditioners, open-ame grills, boilers, or furnaces.
∙ Disassembling the Solar Spotlight Charger is not recommended as it may cause
damage to internal components. The Solar Spotlight Charger may not function
properly after disassembly.
∙ Make sure the Solar Spotlight Charger is properly installed onto the wall with screws
to prevent it from falling.
∙ The Solar Spotlight Charger can be titled at different angles . If you feel resistance
when tilting and adjusting the solar panel and the spotlight, stop. It may break the
Solar Spotlight Charger.
Features
Solar-Powered Waterproof, Heatproof,
and Durable
PIR Motion
Sensor
400 Lumens
of Light
Day and Night
Sensor
Charge your
camera

Page 3 - 6
Need help? Send us an email at: [email protected]om
1. Mount the Solar Spotlight Charger at least 7 ft (2 m) above the ground and aim it
slightly downward (at least 15° downward) for the most eective results.
2. Make sure that there are no unwanted side-to-side movements, such as passing cars,
that cross the detection zone regularly. The motion sensor is more sensitive to
side-to-side movements across its eld of view than to movements directly toward or
away from the Solar Spotlight Charger.
3. The best range for motion detection is around 5 to 20 ft (1.5 to 6 m) from the Solar
Spotlight Charger’s position.
Best Practices to Optimize Motion Detection
Power Button Charging Port
The solar panel and the spotlight can be tilted, rotated
and adjusted easily to the desired angle and view.

Page 4 - 6
Need help? Send us an email at: [email protected]om
1. Please charge the internal battery by placing the Solar Spotlight Charger in direct
sunlight for 10 hours. Make sure the solar panel faces towards the sun.
2. After you have charged it, press the power button to turn the Solar Spotlight Charger
on, it should light up to check if it functions normally.
Note: During daylight, the LED spotlight will not light up. You need to have a darker
environment for the LED Spotlight to turn on.
1. Mark and then drill two holes on the wall for attaching the Solar Spotlight Charger.
Ensure that the drill holes align with the holes of the Solar Spotlight Charger base
holes. (Refer to the diagram above)
2. Install the base of the Solar Spotlight Charger onto the wall using the provided
screws and anchors. Ensure that the Solar Spotlight Charger is perpendicular to the
wall.
3. Turn the power button on after you have mounted the Solar Spotlight Charger.
3. Press the power button to o and proceed to mounting.
Pre - Installation
Mounting the Solar Spotlight Charger
Power Button
Screw hole

Page 5 - 6
Need help? Send us an em ail at: [email protected]om
1. You can connect the Solar Spotlight Charger to your security camera to begin
charging the camera.
2. Open the charging port of the Solar Spotlight Charger and insert the USB-A end of
the charging cable. Connect the magnetic cable end to the camera at the magnetic
charging port. Make sure it is connected rmly. It will start charging your camera
automatically.
Note: Press rmly after you have plugged in the cable to make sure it is sealed well.
1. Assess where intruders are most likely to enter and the path they would take. Most
intruders enter the home through a back door, patio door, or garage door. Hence it is
advisable to place the Solar Spotlight Charger near entrances to your home.
2. Mount the Solar Spotlight Charger on walls that an intruder would walk alongside,
such as a narrow pathway. The motion sensor works best when movements are
detected parallel to the Solar Spotlight Charger, not towards it.
3. You can also mount the Solar Spotlight Charger charger next to your security cameras
to illuminate the camera’s vision at night.
4. Make sure that the Solar Spotlight Charger is consistently in direct sunlight and it is
not obstructed by trees, buildings, or other obstacles.
5. The surface of the Solar Spotlight Charger must be kept clean. If the light’s solar panel
is dusty or dirty, it will inuence the eciency of the light’s ability to charge.
You need to ensure that the solar panel faces the sun for 10 hours straight to fully charge
its internal battery.
Note: The Solar Spotlight Charger is designed to keep your outdoor camera’s battery fully
charged but heavy usage of your camera can drain the camera battery faster than the
Solar Spotlight Charger can recharge it.
Connecting to a Security Camera
Charging Time
Important Notes

Page 6 - 6
Need help? Send us an email at: [email protected]om
∙ Solar Panel : 5V / 3W
∙ Lumens : 400 LM
∙ LED Color : 5500 - 6500K
∙ Waterproof : IP64
∙ PIR sensor range : 26 feet (8m)
Q: Light will not switch on
a. Ensure that the device is powered on by pressing the power button located at
the back of the Solar Spotlight Charger.
b. Ensure that the internal batteries have been fully charged in direct sunlight for
10 hours.
c. Nearby surrounding light may be too bright for the Solar Spotlight Charger to
turn on. Wait for it to be darker so that the Solar Spotlight Charger can turn on.
Q: Light flashes on and off
a. Battery levels may be low. Turn the light off by pressing the power button and
let the sun charge the internal battery.
Q: Light is not as clear as usual
a. Battery levels may be low. Turn the light off by pressing the power button and
charge the internal battery.
b. The surface of the Solar Spotlight Charger must be kept clean. If its solar panel is
dusty or dirty, it will influence the efficiency of the light.
FAQ
Specication
Ring Cameras not included.
Wasserstein is not aliated with Ring, Inc.
Wasserstein is a trademark of Dropcases Ltd.
Ring is a trademark of Ring, Inc.
For more information, please visit:
www.wasserstein-home.com
or contact us at:
[email protected]
™