Wasserstein Solar Panel for Wyze Cam Outdoor User manual

Solar Panel for Wyze
Cam Outdoor
USER MANUAL

Page 1
set of installation screws
& wall anchors
360° mounting
bracket
solar panel
In the Box
1. Do not open or dismantle the solar panel for any reason.
2. Keep the solar panel away from any heat source like a furnace, heater,
or barbeque grill.
3. Make sure that the outdoor charging cable is properly attached to your
camera.
4. Avoid bending, stretching, or cutting the charging cable.
• Make sure that your Wyze Cam Outdoor is fully charged before you
connect it to the solar panel.
• Please place you solar panel at the position with best direct sunshine.
Important Note
Warning

1. Mark the holes using the bracket for guidance.
3. Insert the anchors and screw the mount to the wall.
Installing Solar Panel
Page 2
2. Drill the holes.

Page 3
4. Slide the solar panel onto the mounting piece.
The 360-degrees rotatable mounting bracket allows you to adjust the
Solar Panel in the best position to absorb sunlight.
Adjusting your Solar Panel

Page 4
1. Open the rubber cap at the back of your camera, and plug the cable
firmly into the port.
2. Place the solar panel under direct sunlight to continuously charge to
your camera.
Connect the Solar Panel to your Wyze Cam Outdoor
Specifications
Dimension:
Power:
Voltage:
Outdoor Cable length:
Materials:
7.5 x 4.37 x 0.79 in
2 W
5 V DC
13.5 ft
ABS