Wasserstein Solar Panel for SimpliSafe Wireless Outdoor Security... User manual

Solar Panel for SimpliSafe Wireless
Outdoor Security Camera
USER MANUAL

Page 1
1 x set of screws
and wall anchors
360° mounting
bracket
solar panel
In the Box
1. Do not open or dismantle the solar panel for any reason.
2. Keep the solar panel away from any heat source like a furnace, heater,
or grill.
3. Make sure that the outdoor charging cable is properly attached to your
camera.
4. Do not bend, stretch, or cut the charging cable.
• Fully charge the SimpliSafe Outdoor Security Camera before
connecting it to the solar panel.
• Mount the solar panel in a place that gets direct sunshine.
Important Note
Warning

1. Mark the holes using the bracket for guidance.
3. Insert the anchors and screw the mount to the wall.
Installing Solar Panel
Page 2
2. Drill the holes.

Page 3
4. Slide the solar panel onto the mounting piece.
The 360-degree rotatable mounting bracket allows you to adjust the
solar panel in the best position to absorb sunlight.
Adjusting Solar Panel

Page 4
1. Open the rubber cap at the back of your camera, and plug the cable
firmly into the port.
2. Place the solar panel under direct sunlight to continuously charge your
camera.
Connecting to Camera
Specifications
Dimension:
Power:
Voltage:
Outdoor Cable length:
Materials:
7.5 x 4.37 x 0.79 in
2 W
5 V DC
13 ft
ABS

Get More Support
Scan the QR code below or email us at [email protected].
SimpliSafe Wireless Outdoor Security Camera is not included.
SimpliSafe Wireless Outdoor Security Camera is a
trademark of SimpliSafe, Inc.
Wasserstein is not affiliated with SimpliSafe, Inc.
Wasserstein is a trademark of Dropcases Ltd. Made in China
www.wasserstein-home.com