SECBNEBL51
30-70mm
English
Applicable size .........................................................01
Product components..................................................03
Accessories list (TOOL BOX)
Install battery
.....................................04
Setting operation ......................................................06
Unlock and lock .......................................................08
Bluetooth activation and login instructions
Select"Android/iOS"to download
Log in to the app
.......................09
Bind the device ........................................................10
FAQ
Specifications...........................................................11
Uresetting diagram
Adjust the length of the cylinder
Installation pictures/video
..................................05
Wl620501670
In accordance with the required lock cylinder length, you can adjust the internal and
external length by loosening the screw with an inner hexagon spanner and pulling out
the handle as needed; if necessary, you can increase the lock cylinder length by using
an extended lock cylinder piece and tighten the screw after adjustment. Plugged the
adjusting hole with a silicone plug, which can play a certain waterproof role.
SECBNEBL51
ID:195106XX
Applicable size
Product Components
Catalogue
Front
handle
Fingerprint
Set key
Wake up
key
Cam
Lock cylinder
Product ID
Reset
Please use power bank
to charge the lock via
USB cable,and then
unlock the lock via
welock APP
Another method
of unlocking
Please note:
No supp ort for
charging
Open
Rear handle
screw
Front handle
screw
Accessories list (TOOL BOX)
If there is alack of accessories, please contact customer service in time.
RFID Card * 3
Phillips
screwdriver *1 Allen key *1
Fixing screw for
battery cover* 2
Front handling
screw* 2
Silicone plug* 2
Thimble*1
Manual Product ID
Install battery
1. Loosen the screws with allen key 2. Open the metal case
3. Open the battery cover
5. Install battery
4. 3 * AAA battery
(Please buy it by yourself)
6. Fix the battery cover and tighten
the screws
Silicone plug
Adjusting the length of the lock cylinder
Due to the security reason, the front handle cannot be taken off.
Align and tighten
the holes with a cross screwdriver
Lock cylinder
extension * 1
cross
screwdriver * 1
Spare lock cylinder extension, which can increase the length of the lock cylinder if necessary.
Installation pictures
Uresetting diagram
1. Remove the fixing screw and
original cylinder 2. Take out the screws and take
out the rear handle
3.The lock cylinder is installed into
the lock hole from the outside 4. Installation Fixing screws
5. Install rear handle 6. Fixed rear handle screw
Reset
Thimble
1. Opening the silicone cover
2. Find the Thimble in the attached accessories
3. Find the hole where the reset button is located
4. Insert the thimble into the hole and press the reset button
40.60.12.1101
