Well MOOD User manual
USER MANUAL
Model: MOOD
(Indoor Thermometer)
Thank you for choosing WELL product. Please read carefully the following instructions and keep them
within reach.
Reorder No: THERM-IND-MOOD-WL
OVERVIEW
MAIN UNIT
1. TIME 2.ALARM 3. SNOOZE 4. INDOOR TEMPERATURE 5. INDOOR HUMIDITY 6.HANGING HOLE
7.STANDING BRACKET
FEATURES
1. Calendar display.
2. 12/24 hours selectable.
3. Alarm function & Snooze function.
4. Indoor Temperature display with ℃/℉selectable.
5. Indoor temperature range: -9℃~+50℃.
6. Indoor humidity range: 20% ~ 90%
7. Records Min/Max Indoor temperature/humidity.
8. Temperature/Humidity trend indication.
GETTING STARTED
POWER SUPPLY
1. Remove the battery compartment cover.
2. Insert 2x AAA battery matching the polarity (+and-).
TIME SET
1. Press and hold “TIME”key for 2 seconds to enter into time setting
2. The figure to be set will be flashing.
3. Press “UP”key to change the settings
4. The setting order is: 12/24-hr format , Second, Hour, Minute Year, Month, Date.
5. Press “TIME”again to confirm and exit setting.
ALARM & SNOOZE SET
ALARM SETTING
1.Press “AlARM”key for 2 seconds to enter into alarm setting.
2.The figure to be set will be flashing.
3.Press “UP”key to change the settings,
4.The setting order is: Hour Minute.
5.Press “ALARM”again to confirm and exit setting. indicate alarm is ON
6.Press “UP”to off alarm function
SNOOZE FUCTION
1. Touch “SNOOZE”to silence it for 8 minutes, OR
2. Press any other key to turn the alarm off and activate it again after 24 hours.
TEMPERATURE & HUMIDITY
1 The indoor temperature and humidity will display within 3~8 minutes automatically after set up.
2.Press “C/F”key to switch C / F
3. Press and release the “MIN/MAX”key repeatedly, the current indoor temperature /humidity will
alternate between the MIN/MAX temperature recordings and the current value.
4. In MIN/MAX display mode, press and hold “MIN/MAX”key to reset indoor temperature /humidity
MIN/MAX records to current values at the same time.
POSITIONED METHOD
The thermometer can be positioned in 2 ways as desired.
A. Pull out the table stand brackets from the rear of the thermometer, place on table or desk as desired.
B. Hang on the wall by hanging hole.
PRECAUTIONS
Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary,
clean it with a soft cloth.
Never immerse the product in water. This can damage the product.
Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different types.
Do not mix alkaline, standard or rechargeable batteries with this product.
Remove the batteries if storing this product for a long period of time.
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for
special treatment is necessary.
Waste electrical and electronic equipment are a special waste category,
collection, storage, transport, treatment and recycling are important because
they can avoid environmental pollution and are harmful to health. Submitting
waste electrical and electronic equipment to special collection centers makes
the waste to be recycled properly and protecting the environment. Do not
forget! Each electric appliance that arrives at the landfill, the field, pollutes the
environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
Table of contents
Other Well Thermometer manuals
