Westcott FJ80 II User manual

QUICK START GUIDE
Visit fjwestcott.com/firmware to download the latest firmware
SPEEDLIGHTS

Included Components & Overview
FJ80 II Speedlight, FJ80 II Lithium Polymer Battery, Battery Charger, Shoe Stand, USB-A to
USB-C Cable, Travel Case
Fresnel Lens
AF Assist
Battery
Shoe Lock Dial
1/4"-20 Receptacle
USB-C Port
(Firmware Updates)
Serial Number
(behind battery)
Battery Releases
Home Button
Articulating Head
Power Button
Ventilation
Test Button
Color Touchscreen

LCD Display & Menus
Host
Client
Speedlight
Settings
Main Menu
VersionPage 2/3 1.0
AF Beam AUTO
Language English
DECIMAL
Display
OK
Factory Reset
VersionPage 3/3 1.0
Canon
Nikon
Sony
Fuji
Olympus
Lumix
OK
VersionPage 1/3 1.0
Screen 2
1.5
OFF
ON
ON 00
Auto-Off
X-Sync
Beep
ON
Freeze
RT ID#
OK
ON
ON
ON
ON
ON
ON
Settings Menu
VersionPage 2/3 1.0
AF Beam AUTO
Language English
DECIMAL
Display
OK
Factory Reset
VersionPage 3/3 1.0
Canon
Nikon
Sony
Fuji
Olympus
Lumix
OK
VersionPage 1/3 1.0
Screen 2
1.5
OFF
ON
ON 00
Auto-Off
X-Sync
Beep
ON
Freeze
RT ID#
OK
ON
ON
ON
ON
ON
ON
Settings Menu
Canon
TTL
+
OK
OFF
MODE
Speedlight Menu
A
B
C
D
E
ACamera Brand Selection,
Sync Function Selection
BFlash Mode Icon, Lock Icon,
Battery Icon Indicator
CPower Output Value / FEC ±3
DMode Selection, Zoom
Selection, Modeling Lamp
Setting
ESelection Control Arrows,
OK Button
TTL-ALL
CH 01
NOR
+
OK
GR A
TTL
OFF
MODE
Client Menu
A
B
C
E
D
F
AFJ Wireless Enabled, Channel
Selection, Group Selection
BFlash Mode Icon, Lock Icon,
Battery Icon Indicator
CPower Output Value / FEC ±3
DSync Function Icon
EMode Selection, Zoom
Selection, Modeling Lamp
Setting
FSelection Control Arrows,
OK Button
AM3.0 0
0
0
3.0
3.0
M
M
B
C
CH 01 GR A Canon
OK
5mm
Host Menu
A
B
C
D
E
ACamera Brand Selection,
Channel Selection, Group
Selection
BLock Icon, Battery Icon
Indicator
CTTL / M Group Designations,
Power Output Value / FEC ±3,
Modeling Lamp Control
DSync Function Selection,
Zoom Selection, Host
Speedlight Enable/Disable
ESelection Control Arrows,
OK Button

Introduction
This guide covers setup, controls, and basic operation.
Visit fjwestcott.com/documentation and scroll to the Support
section to download the complete FJ80 II User Manual.
• IMPORTANT: During operation, the temperature of the speedlight lens and various components of
the FJ80 II speedlight may increase. Please use caution while using to avoid severe burns or injuries.
• Use only with the Westcott FJ80 II Lithium Polymer Battery and Charger.
• Do not touch the speedlight lens after immediate use to avoid potential injury.
• Never leave unattended around children and/or pets.
• Always confirm proper installation, locking, and unlocking when adding or removing from the
camera hot shoe. Failure to completely rotate could result in damaging the locking pin.
• Keep away from fire, water, and moisture.
• Do not submerge in water.
• Avoid drastic temperature changes before, during, or after use.
• Always remove the FJ80 II Lithium Polymer Battery from the FJ80 II Speedlight during travel/
storage to avoid accidental operation, which could lead to overheating or permanent damage.
• Do not force adjust or add excessive weight to the speedlight head.
• Only use the FJ80 II Speedlight with FJ80 Series compatible mounts, brackets, modifiers and/or
accessories.
• Do not attempt to modify any Westcott products. Contact Westcott for assistance.
• The maximum operating temperature is 14~122°F (-10~50°C).
Dual-Stage Heat Protection
The FJ80 II is equipped with a self-monitoring system ensuring safe operation during continued full-
power use during a short timeframe. The monitoring system provides a staged automatic protection
scenario;
• Stage 1: Once the speedlight reaches an internal operating temperature of 212°F (100°C), the screen
will display a yellow OH. The recycle time will also increase to 2 seconds in eorts to cool the unit
while allowing for further operation.
• Stage 2: Once the strobe reaches an internal operating temperature of 266°F (130°C), the screen
will display a red OH icon. The recycle time will increase an additional 2 seconds in eorts to cool
the unit while allowing for further operation.
• Once the unit has cooled, the red OH will disappear from the touchscreen, and it will then be safe to
continue operation.
Note: The LED modeling lamp will be disabled during OH in eorts to minimize heat.
Warning

Getting Started
Charging the FJ80 II Lithium Polymer Battery
1. Ensure the FJ80 II is OFF by long-pressing the Power button until the LCD screen turns o.
2. Remove the battery from the FJ80 II by pressing the two release buttons on the sides of the
battery and gently pull the battery away from the FJ80 II battery port.
3. Connect the USB-C Cord to the FJ80 II Battery Charger and plug the AC adapter into a wall outlet.
4. Align the metal contacts on the back of the FJ80 II battery with the contacts on the FJ80 II
charger; while pressing the buttons on the side of the battery, gently insert the battery into the
charger and gently press down until the battery locks into place.
5. The battery is charged and can be safely removed from the charger when all of the LED
indicator lights turns green.
6. Remove the battery from the charger by pressing the side release buttons and gently pulling
away from the charger.
Battery Charger LED Indicator Light Colors:
Green:
• No Battery Inserted: One indicator illuminated green means the charger is plugged into a power
outlet and ready to charge the FJ80 II Li-po Battery.
• Battery Inserted: The FJ80 II Battery is fully-charged and ready to be removed from the charger.
Orange:
• Battery Inserted: The FJ80 II Battery is correctly inserted and charging.
Attaching the Lithium Polymer Battery
Attach the FJ80 II Battery into the speedlight by aligning the metal contacts on the back of the
battery to the contacts on the FJ80 II battery port and gently press the battery into the port until it
clicks into place.
Powering On
1. Ensure the FJ80 II battery has been fully charged.
2. Ensure the battery is securely attached to the FJ80 II.
3. Turn the speedlight ON by long-pressing the Power button, then tap the blue power logo on the
screen until the start-up screen appears.
Note: The FJ80 II LCD Touchscreen is protected by a removable clear screen protector that can be
removed at any time by gently pulling the film away from the display.

Mounting
Attaching to a Camera or the Cold Shoe Stand
1. Ensure the FJ80 II is OFF and rotate the dial all the way to the right.
2. Slide the FJ80 II Speedlight base into the camera’s hot shoe or cold shoe stand with the
touchscreen facing the same direction as the rear of the camera or channel opening on the back
of the shoe stand. (Note: Using the FJ80 II M on Sony cameras REQUIRES the #4711 FJ Adapter for
Sony Cameras.)
3. Rotate the Shoe Lock dial left until it’s securely mounted to the camera. Do not overtighten.
Detaching from a Camera or the Cold Shoe Stand
1. Ensure the FJ80 II is OFF.
2. Rotate the Shoe Lock dial left to right. (Note: Ensure that the dial has been completely moved
to the right. Otherwise, the locking pin may be permanently damaged upon removal of the
speedlight.)
3. Securely grasp the sides of the FJ80 II Speedlight, gently slide the speedlight towards the rear
of the camera or cold shoe stand, and completely remove it from the camera’s hot shoe or cold
shoe stand.
Note: Never force or remove the FJ80 II into or away from the camera’s hot shoe.
Attaching & Removing Modifiers
Attaching the FJ80 II Magnetic Modifiers (Sold Separately)
1. Ensure all modifiers have been removed and the FJ80 II’s articulating flash head has cooled.
2. Grasp the edges of the modifier’s magnetic ring, align the magnetic ring with the FJ80 II’s face, and
gently ax it into place. (Note: The magnetic ring may require a slight turn to ensure proper seating.)
3. Remove the magnetic modifier by grasping the magnetic ring and pulling away from the speedlight head.
FJ80 Creative Pack
#4755
Diusion Dome
#4757
5" Reflector
#474 8
Snoot with Honeycomb Grid
#474 6
Magnetic Grid & Gel Pack
#4758

Updating Firmware
IMPORTANT
• If the FJ80 II doesn’t display as an external device after connecting to a computer,
disconnect the USB cable from both devices and restart the computer and firmware
update process.
• It’s recommended that the firmware update installation process be completed only
when the connected computer’s power level is ≥25%. Loss of power of any type during
this process could render the FJ80 II inoperable and require professional repair.
• Removing the USB cable from the FJ80 II without properly ejecting the device from
your computer could render the trigger inoperable and require professional repair.
• Copying the firmware from your computer to the FJ80 II may take a few minutes and/
or halt the copying process. Should this happen, close the copy progress window and
try again. Further copying issues may require the computer to be restarted.
The FJ80 II is designed with a USB-C port to allow for firmware
updates and charging. Future firmware updates may result in
performance enhancements and modified menu options.
The FJ80 II’s firmware version is displayed on the start-up screen.
Please visit fjwestcott.com/firmware to update your FJ80 II to the
latest firmware. Follow the instructions included with the firmware
download to update.

Westcott’s warranty obligations for this product are limited to the following terms.
The F.J. Westcott Co. (“Westcott”) warrants this Westcott branded product against defects in materials and
workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase from Westcott
or an authorized retailer by the original end-user purchaser (“Warranty Period”). If a defect arises and a valid
claim is received within the Warranty Period, at its option and to the extent permitted by law, Westcott will
either (1) repair the defect at no charge, using new or refurbished replacement parts, or (2) exchange the
product with a product that is new or which has been manufactured from new or serviceable used parts
and is at least functionally equivalent to the original product. This Limited Warranty applies only to products
manufactured by or for Westcott that can be identified by the Westcott trademark, trade name, or logo
affixed to them.
This warranty does not apply to: (a) damage caused by accident, abuse, misuse, flood, fire, earthquake, mold,
or other external causes; (b) damage caused by operating the product outside the permitted or intended uses
described by Westcott; (c) a product or part that has been modified to alter functionality or capability without
the written permission of Westcott; or (d) cosmetic damage, including but not limited to scratches, dents and
broken plastic.
Disclaimer: By purchasing, borrowing and/or using this product for any event, both public or private, you,
the customer, accepts all responsibility and releases Westcott, and its associates, of any and all liability in
the event of manufacturer’s defect, malfunction or misuse of the product which may lead to further injuries
or complications unforeseen by the user. Westcott is not responsible for any potential or incurred damage
caused by failure to properly mount, hang, or store the product, which includes, but is not limited to damage
to cameras, electronics, electrical equipment, buildings, building materials, personal injury, death, or disability,
fire damage, or any and all other damage not mentioned previously.
Please contact Westcott Customer Support for a Return Authorization Number “RMA” prior to requesting
warranty service. This RMA must be clearly written on the outside of the box to the left of the shipping label.
Items sent in without pre-authorization or that do not fall under the limited warranty will be returned at the
expense of the sender.
Phone: [phone]
Email: [e-mail]
Shipping: F.J. Westcott Co, 1425-B Holland Rd. Maumee, OH 43537
Visit WESTCOTTU.COM for videos, pro tips, inspiration, and more!
Westcott products are made to the company’s traditionally high standards of quality and comply with
all applicable government safety regulations and requirements. In an eort to provide the best quality
products possible, we periodically make product modifications. Actual products may not be identical
to items pictured. Made in China. ©F.J. Westcott Co. All rights reserved. J1022
Register your new gear online at FJWESTCOTT.COM/REGISTER
Warranty