Westcott U60-B Bi-color LED User manual

U60-B Bi-color LED
User Manual
v 1.0
1/01/2024

1
Contents
Contents......................................................................................................................................... 1
Components (Included)................................................................................................................ 2
U60-B: Overview .......................................................................................................................... 3
U60-B: Display...............................................................................Error! Bookmark not defined.
U60-B: Warnings .......................................................................................................................... 4
Caution ......................................................................................................................................... 4
U60-B: Getting Started ................................................................................................................ 5
Setting Up the U60-B..................................................................................................................... 5
Powering On & Off......................................................................................................................... 5
Adjusting Light Intensity and Color on the Light.............................................................................. 5
Using the Remote Control .............................................................................................................. 5
U60-B: Assembly & Mounting the Magnetic Modifiers ............................................................. 6
Magnetic Octabox Assembly........................................................................................................... 6
Removing, Collapsing, and Storing the Magnetic Octabox................................................................ 6
Attaching the Magnetic Diffusion Dome .......................................................................................... 6
Removing the Magnetic Diffusion Dome ......................................................................................... 6
Mounting an Umbrella or Umbrella-based Modifier .......................................................................... 6
Removing an Umbrella or Umbrella-based Modifier ......................................................................... 7
U60-B: DC Battery Operation...................................................................................................... 7
Required Components [sold separately] .......................................................................................... 7
Connecting a D-Tap/PowerTap Battery........................................................................................... 7
Warranty Information .................................................................................................................. 8
Legal Information ......................................................................................................................... 8

2
Components (Included)
●U60-B Bi-color LED Light
●U60-B Magnetic Collapsible Octabox
●U60-B Magnetic Diffusion Dome
●U60-B Remote Control
●U60-B AC Power Supply & Cable
Additional accessories may be included with U60-B kits.

3
U60-B: Overview

4
U60-B: Warnings
Caution
●The U60-B LED Array and select components may experience increased surface temperatures
during use. Exercise caution to avoid direct skin contact with the LEDs, surrounding metal
components, and accessories immediately after use to prevent serious injury.
●Use only with the Westcott U60-B AC Power Adapter and Cord or 14.4/14.8V D-tap Batteries.
Incompatible power sources may compromise performance and safety.
●Never leave unsecured and unattended equipment around children and/or pets. Ensure a safe
environment by storing the U60-B responsibly.
●Avoid Hazards: Keep Away from Fire, Water, and Moisture Keep the U60-B away from fire,
water, and moisture to prevent damage and potential safety hazards.
●Do not submerge the U60-B in water. Exposure to water can cause irreparable damage and
pose serious safety risks.
●Avoid drastic temperature changes before, during, or after use to maintain optimal
performance. Sudden temperature variations may affect the U60-B's functionality.
●Exercise care when adjusting the tilter bracket tension knobs. Do not overtighten, as this may
lead to damage. Use controlled force during adjustments.
●Ensure Stability Before Use: Ensure the U60-B is securely mounted to prevent accidents.
Confirm stability to guarantee a safe operating environment.
●Contact Westcott for Assistance: Do not attempt to modify any Westcott products. For any
assistance or modifications, contact Westcott directly to ensure product integrity and safety.
●Operating Temperature Range: The operating temperature range for the U60-B is 32-95ºF (0-
35ºC). Operate within these limits to ensure optimal performance and longevity.

5
U60-B: Getting Started
Setting Up the U60-B
1. Loosen the knob closest to the base of the U60-B tilter bracket.
2. Place the U60-B on your preferred light stand or mounting arm, and tighten the knob to secure
it.
3. Loosen the larger knob and adjust the U60-B’s angle to the preferred position. Tighten the knob
to secure it in place.
4. Assemble the power cords and AC power supply.
5. Insert the barrel plug into the power receptacle located on the lower rear portion of the light.
6. Turn the locking nut clockwise to secure to the U60-B. [Note: If the locking nut is difficult to
turn, the cable’s barrel may not be fully inserted into the U60-B. Gently press the nut towards
the U60-B to secure the connection.]
7. Plug the AC power cord into a wall outlet.
Powering On & Off
1. Long press the Power button to turn the U60-B on.
2. Long press the Power button again to turn the U60-B off.
Adjusting Light Intensity and Color on the Light
1. Power the U60-B on.
2. Quick press the DIM ∙CCT button to toggle between Intensity and Color adjustment modes.
3. Once the desired mode is selected, it will begin to blink on the display.
4. Turn the dial clockwise or counter-clockwise to adjust the intensity [1-100%] or CCT [3200K-
5600K].
Using the Remote Control
1. Insert the remote batteries.
2. Ensure the U60-B is powered ON.
3. Adjusting Intensity
a. Press and hold the top button [illuminated bulb symbol] to increase the intensity.
b. Press and hold the bottom button [light bulb icon] to decrease the intensity.
4. Adjusting Color
a. Press and hold the left button (sun symbol) to achieve a warmer CCT.
b. Press and hold the right button (snowflake symbol) to achieve a cooler CCT.

6
U60-B: Assembly & Mounting the Magnetic Modifiers
Magnetic Octabox Assembly
1. Face the front of the Octabox downward while grasping the black Octabox adapter ring.
2. While firmly holding the adapter ring, select a single Octabox rib and pull it back until it clicks
into position.
3. Going clockwise, continue to click each rib into place.
4. Attach the included front diffusion panel to the front of the Octabox. Attaching the Magnetic
Octabox
1. Allow the U60-B to cool for 5 minutes before adding or removing any modifiers.
2. Remove the U60-B Diffusion Dome from the front of the U60-B, exposing the LED array.
3. While holding the Octabox, align the opening of the adapter ring with the front of the U60-B.
4. Move the adapter ring closer to the front of the U60-B until the magnetic attraction mounts the
modifier to the U60-B.
5. Confirm the Octabox is aligned and properly mounted before using.
Removing, Collapsing, and Storing the Magnetic Octabox
1. Allow the U60-B to cool for 5 minutes before removing the Octabox.
2. Firmly grasp the Octabox and pull away from the U60-B. Ensure that the light stand or
mounting device does not fall over during this process. [Note: You may find it easier to remove
the Octabox by removing the diffusion panel first.]
3. With the face of the Octabox facing downward and holding the adapter ring, use your thumbs
to simultaneously press two adjacent square release buttons on the adapter ring to release two
sections of ribs. Finish collapsing the modifier by simultaneously pressing the remaining two
release buttons. [Note: The tension release of the ribs may produce a sound that some may
find startling the first time. Please note, this sound is normal.]
4. Once collapsed, store at room temperature
Attaching the Magnetic Diffusion Dome
1. Allow the U60-B to cool for 5 minutes before adding or removing any modifiers.
2. Grasp the front of the Diffusion Dome and align the dome's opening with the front of the U60-
B.
3. Move the Diffusion Dome closer to the front of the U60-B until the magnetic attraction mounts
the modifier to the U60-B.
4. The Diffusion Dome may require a slight turn to ensure the proper mounting.
Removing the Magnetic Diffusion Dome
1. Allow the U60-B to cool for 5 minutes before removing the Diffusion Dome.
2. Firmly grasp the dome and pull away from the U60-B. Ensure that the light stand or mounting
device does not fall over during this process.
Mounting an Umbrella or Umbrella-based Modifier
1. Allow the U60-B to cool for 5 minutes before adding or removing any modifiers.

7
2. Loosen the umbrella receptacle tension screw located on the U60-B tilter bracket.
3. Insert the rod of the modifier in the receptacle and tighten the screw to secure it in place.
Removing an Umbrella or Umbrella-based Modifier
1. Allow the U60-B to cool for 5 minutes before adding or removing any modifiers.
2. Loosen the umbrella receptacle tension screw located on the U60-B tilter bracket.
3. Slide the rod of the modifier out of the umbrella receptacle.
U60-B: DC Battery Operation
Required Components [sold separately]
•14.4/14.8 D-Tap/PowerTap Battery
•Westcott D-Tap to Barrel Plug Cable (#4908)
Connecting a D-Tap/PowerTap Battery
1. Ensure the U60-B is off.
2. Unplug the AC adapter from the U60-B.
3. Insert the barrel plug of the Westcott D-Tap cable into the power receptacle located on the
lower rear portion of the U60-B.
4. Plug the D-Tap connector into the battery.
5. Power on the battery.
6. Press and hold the Power button on the U60-B.

8
Warranty Information
Westcott’s warranty obligations for this product are limited to the following terms.
The F.J. Westcott Co. (“Westcott”) warrants this Westcott branded product against defects in materials
and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase
from Westcott or an authorized retailer by the original end-user purchaser (“Warranty Period”). If a
defect arises and a valid claim is received within the Warranty Period, at its option and to the extent
permitted by law, Westcott will either (1) repair the defect at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product that is new or which has been
manufactured from new or serviceable used parts and is at least functionally equivalent to the original
product. This Limited Warranty applies only to products manufactured by or for Westcott that can be
identified by the Westcott trademark, trade name, or logo affixed to them.
This warranty does not apply to; (a) damage caused by accident, abuse, misuse, flood, fire,
earthquake, mold, or other external causes; (b) damage caused by operating the product outside the
permitted or intended uses described by Westcott; (c) a product or part that has been modified to alter
functionality or capability without the written permission of Westcott; or (d) cosmetic damage,
including but not limited to scratches, dents, and broken plastic.
Disclaimer: By purchasing, borrowing, and/or using this product for any event, both public or private,
you, the customer, accepts all responsibility and releases Westcott, and its associates, of any and all
liability in the event of manufacturer’s defect, malfunction or misuse of the product which may lead to
further injuries or complications unforeseen by the user. Westcott is not responsible for any potential
or incurred damage caused by failure to properly mount, hang, or store the product, which includes,
but is not limited to damage to cameras, electronics, electrical equipment, buildings, building materials,
personal injury, death, or disability, fire damage, or any and all other damage not mentioned
previously.
Please contact Westcott’s Repair Department for a Return Authorization Number “RMA” prior to
requesting warranty service. This RMA must be clearly written on the outside of the box to the left of
the shipping label. Items sent in without pre-authorization or that do not fall under the limited warranty
will be returned at the sender’s expense.
Repair Department: 419-243-7311
Email: [e-mail]
Shipping: F.J. Westcott Co, 1425-B Holland Rd. Maumee, OH 43537
Legal Information
Westcott products are made to the company’s traditionally high standards of quality and comply with
all applicable government safety regulations and requirements. To provide the best quality products
possible, we periodically make product modifications. Actual products may not be identical to the items
pictured. Future firmware updates may result in performance enhancements, removal of features to
achieve optimal performance, and modified menu options and layouts.
Made in the USA. ©F.J. Westcott Co. All rights reserved.