Whittier Wood 2363GAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/16
Model #
2363GAC;
2363CAF
McKenzie Cal-King
Mantel Bed
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2363GAC; 2363CAF McKenzie Cal-King Mantel Bed
Parts List
2363GAC_2363CAF — Page 2 — 03/16
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
2364GAC; 2364CAF
Cal-King Mantel Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Assembled Foot
4
D
Cal-King Slat (72-1/4")
5
E
Adjustable Glide with Hex Nut (installed)
4
F
#8 x 1-1/4" Pan Head Screw (inserted)
8
G
#8 x 1-1/4" Black Screw
14
(4 inserted)
H
#8 x 2" Black Screw (inserted)
2
I
#8 x 1" Black Screw (inserted)
24
J
1/4" T-Nut (inserted)
5
K
5/16" x 3/4" Insert Nut (inserted)
4
L
1/4" x 45mm Hanger Bolt (inserted)
4
M
Small Left Bed Bracket (attached)
4
N
Small Right Bed Bracket (attached)
4

2363GAC; 2363CAF McKenzie Cal-King Mantel Bed
Parts List
2363GAC_2363CAF — Page 3 — 03/16
2365GAC; 2365CAF Cal-King Rail Kit (x1)
Part
Description
Quantity
M
Small Left Bed Bracket (attached)
4
N
Small Right Bed Bracket (attached)
4
O
Side Rail
2
P
#8 x 5/8" Flat Head Screw (inserted)
24
Q
#8 x 2" Black Screw (inserted)
22

2363GAC; 2363CAF McKenzie Cal-King Mantel Bed
Assembly Instructions
This assembly requires two people.
2363GAC_2363CAF — Page 4 — 03/16
Tools Required: Phillips screwdriver
1. Remove the Slats (D) from the back of the Headboard (A) and place them off to the side. See
Figure 1.
2. To attach the Footboard (B) to the Side Rail (O), align the Brackets and slide the Side Rail down
on to the Footboard (B). See Figures 2 and 2a.
Fig. 2
O
B
Fig. 2a
Fig. 1
Shipping Straps
D
A

2363GAC; 2363CAF McKenzie Cal-King Mantel Bed
Assembly Instructions
This assembly requires two people.
2363GAC_2363CAF — Page 5 — 03/16
3. Repeat step two for the other side. See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (A). See Figure 4.
Fig. 4
A
Fig. 3
O
Fig. 3a

2363GAC; 2363CAF McKenzie Cal-King Mantel Bed
Assembly Instructions
This assembly requires two people.
2363GAC_2363CAF — Page 6 — 03/16
5. Attach an Assembled Foot (C) to four of the five Slats (D) as shown in Figure 5.
6. Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (G). See Figure 6.
7. Adjust the Adjustable Glides with Hex Nut (E) on the Assembled Feet (C) so the Glides just
touch the floor, making sure the Assembled Feet bear weight.
E
Fig. 7
C
G
x 10
Fig. 6
G
Slat without
an
Assembled
Foot.
D
D
Fig. 5
X 4
C