WineEnthusiast VinoView 269 0X 88 0Y User manual

72.64”
27.56”
23.62”
72.44”
3.94”
26.77”
23.43”

POWER LIGHT DISPLAY
WINDOW
TEMP
UP
TEMP
DOWN

9
Before You Start
The wine cellar should be placed in a location where the ambient temperature is between
60-80°Fahrenheit. If the ambient temperature is above or below this range, the
performance of the unit may be affected. For example, placing your unit in extreme cold
or hot conditions may cause interior temperatures to fluctuate.
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back after 5 seconds.
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. Set the desired temperature by pushing the Temp UP or DOWN button.
4. Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
NOTE: Temperatures may fluctuate depending on whether the interior light is ON
or OFF and depending on the position of the bottles.
Lock or Unlock the Control Panel
To LOCK the control panel:
The control panel will lock automatically after 2 minutes if the cooler has no any
operations during this period.
To UNLOCK the control panel:
1. Simultaneously press the + and - buttons for 5 seconds.
2. The control panel will beep when it is unlocked.
Temperature Settings for Serving Wine
Although optimal storage temperature is generally regarded to be 53-57°F,
different varietals of wine require different service temperature settings. The
recommended temperature ranges for serving different varietals of wine are listed

C M
C
US
Intertek