WineEnthusiast 272 03 09 User manual

INSTRUCTION MANUAL
8 Bottle Wine Cellar
MODEL: 272 03 09
Please read carefully and follow all safety rules and operating instructions.

Contents:
1.Your Wine Cellar
2.Technical Data
3.Important Safety Instructions
4. Problems Disposal
5.Installation Instructions
6.Electrical Connection
7.Operating Your Wine Cooler
8.Care And Maintenance
9.Limited Warranty

Your Wine Cellar
1. Upper Hinge 6. Feet 11. Lower Door Hinge
2. Upper Hinge Cover 7. Water Tray 12. Temperature Down Key
3. Light 8. Glass 13. Temperature Up Key
4. Shelf 9. Gasket 14. Display
5. Cooling Fan Mask 10. Recessed Handle 15. Light On/ Off Key
Technical Data
Model no.
272 03 09
Capacity
23L
Voltage
115V/60HZ
Current
1.0A(77°F)
Protection class
Ⅰ
Climate class
SN;N
Input power
70W(77°F)
Power Consumption(KW.h/24h)
1.0(59°F)
Temperature Control Range
51-64°F
Net weight
21.00 LBS
Gross weight
28.80 LBS
Shape size (W×H×D)
17×12×20 IN
Carton box packing size (W X H X D)
20.7×16.1×23.4 IN

Electric Diagram
Important Safety Instructions
Read all instructions before using the wine cooler.
DANGER or WARNING: risk of child entrapment.
Junked or abandoned appliances are dangerous …even if they “just sit in the garage a few days.”
Before you throw away your old wine cooler: take off the door and leave the shelves in place so that children
may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The
fumes can create a fire hazard or explosion.
Do not store food in wine cooler, as interior temperature may not get cool enough to prevent spoilage.
Problems Disposal
1. Please remove the door before you dispose your refrigerator
2. Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is
necessary.
Save these instructions
To reduce the risk of fire, electrical shock, or injury when using your
appliance, follows these basic precautions;

Installation Instructions
Before using your wine cooler
Remove the exterior and interior packing
Check to be sure the following parts are included:
2 Slide out shelves.
1 Instruction manual.
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the
possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
To level your appliance, adjust the front legs at the bottom of the appliance.
Not designed for placement in adage or basement.
The appliance is for indoor use only.
Electrical Connection
This unit should be properly grounded for your safety. The power cord of this unit is equipped with a 3-pin plug which mates
with 3-pin wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the ground
wine from the power cord supplied.
Use of extension cords is not recommended.
This unit requires a standard 110V-60HZ electrical outlet with 3-pin plug.
The cord should be secured behind the wine cooler and not let exposed or dangling to prevent accidental injury.
Operating Your Wine cooler
It is recommended that you install the wine cooler in a place where the ambient temperature is between 51°F - 80°F. If the
ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example,
placing in extreme cold or hot conditions may cause interior temperature to fluctuate. The range of 51 - 64°F may not be
reached.
The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on
the upper, middle or lower section.
How to set the temperature:
There are three touch-buttons on the control panel:
“” and “ ” increases or decreases the set temperature by 1°C or 1°F (temp range is 51-64°F).
“ ” button turns on or off the interior light.
You can select temperature display setting from Fahrenheit to Celsius degree by
pushing the and buttons at the same time and holding for 3 seconds.
Fahrenheit or Celsius degrees indicator will appear in blue color in the LED
temperature display window.
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by an authorized service center.

Note:
This product is designed for maximum cooling of 25°F below ambient temperature.
When the ambient temperature around 77°F, unit can maintain a temperature range between 51-64°F.
Care And Maintenance
Cleaning your wine cooler
Unplug the wine cooler and remove the bottles.
Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to
a quart of water.
The outside of wine cooler should be cleaned with mild detergent and warm water.
Draw out the water box at the bottom, and wash.
Moving your wine cooler
Remove all the bottles.
Securely tape down all loose items inside your wine cooler.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the wine cooler stays in the upright position during transportation.
Trouble Shooting
You can solve many common wine cooler problems easily, saving you the cost of a possible service call. Try the suggestions
below to see if you can solve the problem before calling the service center.
PROBLEM
POSSIBLE CAUSE
Wine cooler does not operate
Not plugged or using different voltage. The circuit
breaker may be tripped or a fuse may be blown.
Wine cooler is not cold enough
Check the temperature control setting.
External environment may require a higher setting.
The door is has been opened too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance.
The light does not work
Check to see if the bulb has burned out.
Vibrations
Check to assure that the wine cooler is level.
The wine cooler seems to make too much
noise
The wine cooler is not level.
Check the fan.
The door will not close properly
The wine cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
LED display not working
Main control board does not work.
PCB Problem.
There is a problem with the plug.
LED display error
Weak quality of display.
Temperature is off.
Buttons are not functional
Temperature controller panel is damaged

Limited Warranty
Please speak to your Retailer before calling Wine Enthusiast if you did not purchase your Wine Cellar directly from Wine
Enthusiast.
Limited warranty –The Wine Enthusiast companies, in agreement with our manufacturers, warranties all wine cellars to
be free from defects due to workmanship or material under normal use and service for a period of (1) year from receipt for
both parts and labor. For customer service, please contact Wine Enthusiast by e-mail ([e-mail]) or
by phone [phone]).
If your wine cellar is not operating within the Manufacturers' specifications, Wine Enthusiast, and/or the Manufacturer,
reserves the right to repair or replace the wine cellar. Wine Enthusiast may request the consumer contact a local
refrigeration company to service the wine cellar. All cost for labor and materials is covered for 1 full year from date of
receipt. If Wine Enthusiast deems the unit not repairable, Wine Enthusiast will use the value of your original order toward a
replacement. However, the customer will be responsible for all shipping costs on the replacement after the initial 90 days.
Extended warranties are available for an additional cost at the time of purchase or up to the seventh month from date of
purchase. These warranties will extend the 1 year warranty to 2, 3 or 5 years