wink haus BS80MLM33 User manual

The BS80MLM33 cabinet and locker lock is an electronic rod furniture lock.
In terms of immunity to electromagnetic interference, these locks are de-
signed for use inside of residential and oce buildings in accordance with
EN 61000-6-1:2007. Improper use can destroy the system and render any
claims null and void. These operating instructions provide you the informa-
tion you need to install and operate the BS80MLM33 without trouble.
Technical data:
Frequency: 125 kHz
It is essential to observe national legislation on
approved radio frequencies.
Range: Approx. 10 mm between reader unit and
identification medium.
Power supply for
control electronics: Battery type: 3x AA mignon cell, alkaline 1.5V.
NiCd, NiMH or other rechargeable batteries,
as well as zinc - carbon or lithium batteries
are not permitted!
Visual signalling: 2-colour LED (red/green)
Acoustic signalling: Buzzer
Temperature range: Operation: +5 °C to +50 °C at
30% to 80% relative air humidity,
non-condensing.
Storage: -25 °C to +70 °C at
30% at 80% relative air humidity,
non-condensing.
blueSmart reader unit:
Cabinet and locker lock – BS80ML
Operating instructions
Cabinet and locker lock – BS80MLM33

Package content:
System components:
4
6
The BS80MLM33 cabinet and locker lock is an electronic rod furniture lock.
In terms of immunity to electromagnetic interference, these locks are de-
signed for use inside of residential and oce buildings in accordance with
EN 61000-6-1:2007. Improper use can destroy the system and render any
claims null and void. These operating instructions provide you the informa-
tion you need to install and operate the BS80MLM33 without trouble.
Technical data:
Frequency: 125 kHz
It is essential to observe national legislation on
approved radio frequencies.
Range: Approx. 10 mm between reader unit and
identification medium.
Power supply for
control electronics: Battery type: 2x AA mignon cell, alkaline 1.5V.
NiCd, NiMH or other rechargeable batteries,
as well as zinc - carbon or lithium batteries
are not permitted!
Visual signalling: 2-colour LED (red/green)
Acoustic signalling: Buzzer
Temperature range: Operation: +5 °C to +50 °C at
30% to 80% relative air humidity,
non-condensing.
Storage: -25 °C to +70 °C at
30% at 80% relative air humidity,
non-condensing.
blueSmart reader unit:
Cabinet and locker lock – BS80ML
Operating instructions
Cabinet and locker lock – BS80MLM33
5
78
BS80MLM33 furniture lock (Control unit)
BS80MLM33 furniture lock (Motor unit)
blueSmart reader unit
Batteries (3 x 1.5 V AA)
Connecting cable (100 mm)
2x thermoplastic screw (3x20)
2x screw (3x30)
3x screw (3x13)
2x Drive rods 1100 mm
2x Bearing housing
3x Bracket incl. screws
4x Bar guide incl. screws
Furniture handle
Mounting plate for furniture handle 24 mm
Mounting plate for furniture handle 18 mm
Operating instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5
1
7
3
8
4
6
2
Mounting surface
3
1
9
10 11
12
2
16
13 14 15

Description of operation:
The BS80MLM33 electronic locking system lets you conveniently lock and
unlock your furniture electronically! The BS80MLM33 allows selective access
authorisations to be issued, so that only authorised persons will be granted
access to certain furniture. Each electronic control unit in the BS80MLM33
system functions self-suciently without cable connection to other control
units and the power grid.
Displays and operating elements:
1
2
3
4
5
Emergency power supply via micro USB
Visual display
Internal reception antenna
Screw sleeves for fastening
Connection for connecting cable from
blueSmart reader to furniture lock
1
2
3
4
5
4
Dimensions:
BS80MLM33 rod furniture lock
blueSmart reader unit Drilling illustration
74
40
5
7,25
64
ø min. 5,5
ø min. 16
64

Mounting: Step 1
Mounting: Step 2
Click! Commissioning/Mounting:
The motor unit, electronics and display unit are not connected to one another
upon shipping. Please conduct steps 1 and 2 in sequence in order to obtain
a functional unit. After completing a function check, disconnect the display
unit (Fig. 2) from the system again in order to enable trouble-free installation
of the system in the furniture.
1. Plug electronics housing and motor unit together until they click into place.
2. Insert the display unit plug into the electronics bushing in the correct position.
3. Check components to make sure they are seated firmly.
If it is not possible to install the motor unit and electronics in
combination for space reasons (for instance), an optionally
available connection cable between the motor unit and the
electronics can be used.
Changing batteries:
Place the batteries into the electronic control unit before installing the system.
1. Loosen screw. Open battery compartment lid.
2. Insert/change batteries.
3. Close battery compartment lid. Screw in fastening screw.
Installation instructions:
This M33 is a motorised lock with three-point locking. This means that three
deadbolts extend from the housing simultaneously. Rods are generally con-
nected to both lateral sliding bolts. This makes it possible to relocate the
locking points (see installation diagram). The accessories required are part
of the set package. Please use the length calculation in the diagram to deter-
mine the rod lengths. The illustration is based on the example of a revolving
door for furniture.
Sat ngeln ä gn e=B-35
barel nght =B5- 3
Sat ngne l nä ge=A5- 3
ab rlne tg h=A-53
A
B
Lichtse nI nenmaß /nIet nr la hegi ht
76
74
70
7021
21
Rod length calculation: All specifications in mm

The furniture handle supplied can be used to close an existing duct with a
back plate (18 or 24 mm included in the delivery) on the front plate of furni-
ture and simultaneously serves as an opening aid on the door. Further de-
tails on the mechanical connection of the M33 system to your furniture can
be found in the installation instructions of your furniture manufacturer. If you
have any questions on installing the system, consult a carpentry specialist or
your supplier before conducting the installation.
Only mount the furniture lock into the piece of furniture
when it is unlocked. Use type LR6 AA alkaline batteries only.
Make sure the polarity is correct! Rechargeable, zinc-carbon
or lithium batteries are not permitted!
Conducting an emergency opening:
If the batteries in the lock unit are empty and an emergency open-
ing will have to be informed, please use the micro USB power adapter
(Itemno.:5046900). To do so, remove the USB plugs on the bottom of the
reader unit and connect the power adapter to the reader unit using the en-
closed cable. You will then be able to open the cabinet with an authorised
identification medium after 10 seconds at most. Please change the batteries
of the lock housing at once.
Visual and acoustic indicators:
LED red LED green Acoustic signal
Authorised key opening
The signal is made after the authentication check has been con-
ducted and the release position has been reached.
1x 300 ms
Authorised key closing
The signal is made after the authentication check has been con-
ducted.
1x 300 ms
Unauthorised key
The signal is made after the authentication check has been con-
ducted.
1x 750 ms
Triggering without key
This signal is given if the electronics are triggered by an external
125 kHz signal or by an oscillating circuit, but no valid key data
can be read after approx. 270 ms. This makes it possible to detect
unintentional triggering of the electronics in an environment prone
to interference which could cause a battery discharge or other
malfunctions (when reading a key, for example).
1x 8 ms
Release position cannot be reached
This signal will be given if the dead bolt does not reach the release
position (e.g. deadbolt blocked, fouling).
10x 50 ms
Locking position cannot be reached
This signal will be given if the dead bolt does not reach the locking
position (e.g. deadbolt blocked, fouling). If communication to the
motor unit is interrupted, the operation will be aborted after the
signal. Otherwise, it will attempt to engage in locking position again
after a few seconds. If the first attempt is successful, the operation
will end, otherwise the operation will be repeated up to five times.
After that, up to two “secret attempts” (without signalling) for mo-
tor activation will follow at an interval of 60 s. An activation attempt
will also occur if a key is detected during this time.
10x 50 ms

Aug. Winkhaus GmbH & Co. KG · Hessenweg 9 · 48157 Münster · T +49 251 - 49 08 - 0 · F [phone] www.winkhaus.de
ZO MW June 2017 Print-no. 997 000 394 EN All rights, including the right of alteration, are reserved.
Safety instructions:
• When replacing the batteries, pay attention to make sure that the
polarity is correct and the batteries are seated properly!
• Dispose of used batteries properly!
• Batteries do not belong to household garbage!
• Do not heat, disassemble or short-circuit the batteries!
• The batteries may not be charged!
• Never throw batteries in open fire!
• Keep the batteries out of reach of children!
• Persons who have swallowed the batteries must seek
immediate medical attention!
• Damaged and/or leaky batteries can cause skin irritation
and/or poisoning!
Upkeep and maintenance:
• Do not pour liquids into or over the individual components of the sys-
tem and never submerge the components in liquids.
• The product should not be exposed to direct sunlight.
• Only clean the system using a clean, soft and slightly dampened cloth.
• Do not use any cleaning products which contain abrasives or solvents
such as glass, thinners, alcohol, mineral spirits or ammonia, since these
can attack the housing.
• Improper handling of all electronic and mechanical components in a
manner contrary to this user manual may cause malfunctions.
Compliance
Aug. Winkhaus GmbH & Co. KG declares herewith that the
device is compliant with the basic requirements and the
relevant rules in directive 2014/53/EU. The long version of
the declaration of CE confirmity is available at:
www.winkhaus.com/konformitaetserklaerungen
LED red LED green Acoustic signal
Battery warning
If the user ignores the status report “Battery near the end of its life,”
a continuous tone will sound for 5 seconds if the motor unit reports
a completely discharged battery.
5x (200ms signal,
200ms pause, 750ms
signal, 200ms pause)
Time error
If the reader unit is without battery for too long (max. 10 seconds),
because the battery is being changed, for instance, then the time of
day on the reader unit must be synchronised using a programming
device.
10x 10 ms