Winmate R10IB3S-67T2 Operating and maintenance instructions

Please read these instructions carefully before using this product, and save this guide for future use.
Full IP67 Stainless
Resistive Panel PC
Intel® Celeron® Bay Trail-M N2930 1.83 GHz
R10IB3S-67T2
R15IB3S-67C3
R19IB3S-67A1
Quick Start Guide
V1.0
For more information on this and
other Winmate products, please
visit our website at:
www.winmate.com
Document Part Number: 9152111I102Q

- 2 -
Contents
1 INTRODUCTION - 7 -
1.1 Features - 7 -
1.2 Package Contents - 8 -
1.3 Product Overview - 9 -
1.3.1 Dimensions 10.4" - 9 -
1.3.2 Dimensions 15” - 9 -
1.3.3 Dimensions 19” - 10 -
1.4 Connectors - 11 -
1.4 Physical Buttons and LED Indicators - 12 -
2 GETTING STARTED - 13 -
2.1 Turning on Your Device - 13 -
2.2 How to Enable Watchdog - 14 -
2.3 Turning off Your Device - 15 -
3 INSTALLATION - 16 -
3.1 Wiring Requirements - 16 -
3.2 Connector Pin Assignment - 17 -
3.2.1 Power Cable - 17 -
3.2.2 Serial Cable - 18 -
3.2.3 Ethernet Cable - 19 -
3.2.4 USB 2.0 Cable - 20 -
3.3 Mounting - 21 -
3.3.1 VESA Mounting - 21 -
3.3.2 Yoke Mounting - 22 -
4 SPECIFICATIONS - 23 -
APPENDIX A: Cleaning the Monitor - 25 -
Appendix B: Winmate Software Development Kit - 26 -
Appendix C: Ordering Information - 26 -

- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.

- 4 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical, for
any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of
their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to
any product, including circuits and/or software described or contained
in this manual in order to improve design and/or performance. We
assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or
masks work rights to these products, and make no representations or
warranties that these products are free from patent, copyright, or
mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We
make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be
free from material and workmanship defects for a period of one year
from the invoice date. If the customer discovers a defect, we will, at
his/her option, repair or replace the defective product at no charge to
the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must
be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the
shipping date. In the serial numbers the third and fourth two digits
give the year of manufacture, and the fifth digit means the month (e.
g., with A for October, B for November and C for December).
For example, the serial number 1W17Axxxxxxxx means October of
year 2017.

- 5 -
Customer Service
We provide a service guide for any problem by the following steps:
First, visit the website of our distributor to find the update information
about the product. Second, contact with your distributor, sales
representative, or our customer service center for technical support if
you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers
every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.

- 6 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden
power surges. Only experienced electronics personnel
should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de
connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement
du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic devices
are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place
all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles
aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface
conçue pour dissiper les charge, ou dans un sac anti-
statique lorsqu’elles ne sont pas dans le chassis.

- 7 -
1 INTRODUCTION
Congratulations on purchasing Winmate® IP67 Stainless Resistive
Panel PC. Winmate® IP67 Stainless Resistive Panel PC is rugged,
industrial-grade panel PC series built to withstand challenging
environments, undergoing rigorous testing to ensure safety and top
performance. All of the models in the series are sealed to IP67
standard. Stainless housing features anti-corrosion properties making
it suitable for food, chemical and pharmaceutical industries.
Winmate® IP67 Stainless Resistive Panel PC goes beyond that of the
standard industrial panel computers with rugged construction,
powerful performance, and flexible mounting options.
1.1 Features
Winmate® IP67 Stainless Resistive Panel PC features:
10.4”, 15” and 19”
Intel® Celeron Bay Trail-M N2930 1.83 GHz Processor
Fanless Design
Full IP67 dust and water resistant
Stainless Housing with anti-corrosion treatment
Optical Bonding with anti-moisture treatment
Various mounting solutions: Yoke mount and VESA mount
5 Wire Resistive Touch (Optional)

- 8 -
1.2 Package Contents
Carefully remove the box and unpack your device. Please check if all
the items listed below are inside your package. If any of these items
are missing or damaged contact us immediately.
Standard factory shipment list:
Panel PC
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
Varies by product
specifications
9152111I102Q
IB32: 9171111I101Y
AC Adapter
Power Cable
Serial Cable
50W:90PO12050002
80W:90PO12080003
Varies by country
94G0103090Q0
Ethernet Cable
USB Cable
VESA Screws
94I0080080KF
9480108080Q0
913511101101

- 9 -
1.3 Product Overview
This section contains mechanical drawing of the Panel PC. Notice
that this is a simplified drawing and some components are not marked
in detail.
1.3.1 Dimensions 10.4"
Unit: mm
1.3.2 Dimensions 15”
Unit: mm

- 10 -
1.3.3 Dimensions 19”
Unit: mm

- 11 -
1.4 Connectors
IP67 Stainless Resistive Panel PC has IP67 type connectors with
protection cap.

- 12 -
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators located on the rear side of the
Panel PC.
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/
Off
Press to power on or power off the
device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity
(Data is being read or written)
Off
System is idle

- 13 -
2 GETTING STARTED
2.1 Turning on Your Device
Follow the following steps to turn on your device:
1. Connect the AC adapter to the DC-in jack connector located
on the back side of the Panel PC.
2. Connect the power cord to AC adapter.
3. Plug the power cord to the AC outlet and the device will turn
on automatically.
AC Adapter specifications vary by panel size.
Size
10.4”
15”
19”
AC Adapter
12V/ 50W
12V/ 50W
12V/ 80W
Power
Consumption*
33W (typ.)
38W (typ.)
45W (typ.)
*With maximum backlight and high CPU load.

- 14 -
2.2 How to Enable Watchdog
To enable Watchdog, you need to download Winmate Watchdog
utility. Find more information on Watchdog in “Watchdog Guide” that
you can download from Winmate Download Center or File Share.
Refer to the User Manual for more details.
To enable watchdog in Watchdog AP follow the instructions below:
1. On the right bottom side of the desktop screen, click triangle
button to show hidden icons.
2. Click icon to open Watchdog utility.
3. In Watchdog utility window set countdown time and periodically
feed time, or disable watchdog.
Example:
Every 10 min watchdog will
monitor the system, in case
any error occurs the system
will restart automatically when
the countdown time reaches
0.
Every 9 min watchdog timer
will be reset to 10 min.

- 15 -
Settings
Description
Watchdog Countdown
Time
The system automaticity restarts when
this countdown time reaches zero.
Default: 10 min
Periodically Feed Time
To set a cycle time to automatically reset
watchdog timer.
Default: 9 min
Enable / Disable
Enable or disable watchdog.
Default: Enable
2.3 Turning off Your Device
To shut down your device, do the following:
Tap Start ( ) > Shut down.
Wait for your Panel PC to completely turn off before disconnecting the
power cord (if necessary).

- 16 -
3 INSTALLATION
3.1 Wiring Requirements
The following common safety precautions should be observed before
installing any electronic device:
Strive to use separate, non-intersecting paths to route power
and networking wires. If power wiring and device wiring paths
must cross make sure the wires are perpendicular at the
intersection point.
Keep the wires separated according to interface. The rule of
thumb is that wiring that shares similar electrical characteristics
may be bundled together.
Do not bundle input wiring with output wiring. Keep them
separate.
When necessary, it is strongly advised that you label wiring to
all devices in the system.
CAUTION
Do not run signal or communication wiring and power wiring in
the same conduit. To avoid interference, wires with different
signal characteristics (i.e., different interfaces) should be routed
separately.
Be sure to disconnect the power cord before installing and/or
wiring your device.
Verify the maximum possible current for each wire gauge,
especially for the power cords. Observe all electrical codes
dictating the maximum current allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could
overheat, causing serious damage to your equipment.

- 17 -
Be careful when handling the unit. When the unit is plugged in,
the internal components generate a lot of heat which may leave
the outer casing too hot to touch.
3.2 Connector Pin Assignment
This Panel PC is equipped with four connectors which are IP67 level
and fool-proofing design. Use only the cables that are included in the
package. The pin assignments of the cables are as follows.
3.2.1 Power Cable
The IP67 Stainless Resistive Panel PC has IP67 connector. Use
power cable to connect Panel PC to the source of power.
IP67 Stainless Resistive Panel PC supports 12V DC power input.

- 18 -
3.2.2 Serial Cable
The IP67 Stainless Resistive Panel PC has IP67 serial port connector.
Use serial cable to connect serial interfaces.

- 19 -
3.2.3 Ethernet Cable
The IP67 Stainless Resistive Panel PC has IP67 Ethernet connector.
Use Ethernet cable to connect the Panel PC to the Internet.

- 20 -
3.2.4 USB 2.0 Cable
The IP67 Stainless Resistive Panel PC has one Full IP67 USB2.0
connector. Use USB2.0 cable to connect external devices such as
mouse or keyboard to the Panel PC.