Winners Only DELFINI TI-DF30R-G User manual

TFS-19641-PWNWC MADE IN MALAYSIA
Page 1 of 3
PARTS LIST
TI-DF30R--G
DELFINI 30" ROUND PEDESTAL TABLE
PART NO FIGURE DESCRIPTION QTY
Table Top
Pedestal Stand
Pedestal Leg
1 pce
1 pce
2 pcs
T1-DF30R--G-01
T1-DF30R--G-13
T1-DF30R--G-13
T1-DF30R--G-07
T1-DF30R--G-07
T1-DF30R--G-07
T1-DF30R--G-08
T1-DF30R--G-08
Hardware Bag 1 pce
IMPORTANT NOTE : Please keep all hardware parts out of the reach of children.

TFS-19641-PWNWC
TI-DF30R--G
DELFINI 30" ROUND PEDESTAL TABLE
MADE IN MALAYSIA
Page 2 of 3
ASSEMBLY :
STEP 1
STEP 2
Reminders :
Two people are needed for assembly.
Use only hardware supplied.
Do not over tighten bolts.
This item may require periodic tightening.
HARDWARE PART :
Wrench
Flat Washer
(Large)
Lock Washer
(Large)
1 pc 1 pc 1 pc
Hex Nut JCBC Bolt
JCBC Bolt
Allen Key
Allen Key
Metal Cross Bar
Metal Cross Bar
4 pcs 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs
Flat Washer
(Small)
Flat Washer
(Small)
Lock Washer
(Small)
Lock Washer
(Small)
Attach pedestal leg to the pedestal stand by inserting the wood dowel into the pre-drilled holes on the pedestal stand.
Turn base upside down as shown and attach metal cross bar on pedestal leg by using the provided hardware as shown.

TFS-19641-PWNWC
TI-DF30R--G
DELFINI 30" ROUND PEDESTAL TABLE
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.
Wrench
Flat Washer
(Large)
Lock Washer
(Large)
Hex Nut
MADE IN MALAYSIA
Page 3 of 3
STEP 4
STEP 3
Align and attach the table top to the base Assembly by inserting the provided hardware as shown.
Adjust the levelers until the table sits firmly.