Winners Only DK24072 User manual

WINNERS ONLY®
ASSEMBLY INSTRUCTIONS
PROD. NO: DK24072
Thank you for purchasing this quality product. Be sure to check all packaging materials carefully for small parts that may have come loose
inside the carton during shipment.
COMPONENTS LIST DK24072T
C
D
E
1 PC
2 PCS
2 PCS
Mounting Plate
Mounting Block
Wood Stretcher
1 PC
ATable Top
3
Wrench
6
4 PCS
Hex Nut
4
5
Allen Key
7
Wood Screw
8
16 PCS
Flat Washer
4 PCS
4 PCS
HARDWARE LIST
24 PCS
QTYSKETCHDESCRIPTIONNO.
1Short JCBC Bolt 10 PCS
8
2
AD
C
Soft Protective Surface
8
3
STEP 1
Place Table Top (A) upside down on a soft protective surface such as a carpet. Align & fasten Mounting Block (D) to Table Top (A)
using Long JCBC bolt with small washers (2) and fully tighten with Allen Key (8).
STEP 2
Align & fasten Mounting Plate (C) to Mounting Block (D) using Long JCBC bolt with large washers (3)
and fully tighten with Allen Key (8).
1 OF 2
NO. DESCRIPTION SKETCH QTY
SIZE
1 PC
1 PC
M6X16mm
M6X35mm
Ø
ØØ
Ø13mm
Ø
ØØ
Ø18mm
16mm
Ø
ØØ
Ø13mm
Long JCBC Bolt with
small washers
Spring Washer
MADE IN MALAYSIA
9
Long JCBC Bolt with
large washers M6X40mm 2 PCS
COMPONENTS LIST DK24072B
B2 PCS
Table Leg Frame
NO. DESCRIPTION SKETCH QTY
F1 PC
Hardware Bag
IMPORTANT NOTE:
-Please keep all hardware parts
out of the reach of children.
-Two or more people are needed
for assembly.
CAUTION : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your
protection, please remove any exposed staples used in packing.
1.We recommend that you should assemble this product with assistance of another person, this will make assembly easier, and will help to eliminate
damage to the product or injury to persons during assembly.
2.Be sure to check all packing material carefully for small parts that may be come loose inside the carton during shipment.
3.Please do not over tighten screws or bolts.
4.Please put all the parts on a non- abrasive floor before assembly and follow the assembly steps to assemble your newly purchased product correctly
and efficiently.
Reminders :
1. Use only the hardware supplied.
2. This item may require periodic tightening.

B
1
8
E
7
3
4
5
1
8
Use a Philips screwdriver
(Not Included)
STEP 3
Align Table Leg Frame (B) to Table Top (A) using Short JCBC Bolt (1) and fully tighten with Allen Key (8).
Then using a philips screwdriver to tighten wood screws (9).
9
STEP 4
Attach Wood Stretcher (E) to Mounting Plate (C) using Spring Washer (4), Flat Washer (5), Hex Nut (6) and fully tighten with
Wrench (7).
Attach Wood Stretcher (E) to Table Leg Frame (B) using Short JCBC Bolt (1) and fully tighten with Allen Key (8).
STEP 5
Turn the table to upright position.
Assembly is now complete.
Thank you for purchasing this product.
ASSEMBLY INSTRUCTIONS
2 OF 2
A
B
C
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil based or wax are interchanged.
~ Spray your furniture surface evenly. Wipe in a circular motion with a soft clean cloth.
CARE INSTRUCTION
PROD. NO: DK24072
®
WINNERS ONLY