Winners Only T1-NP3636 O Series User manual

TFS-16532-SNMWC MADE IN MALAYSIA
Page 1 of 2
PARTS LIST
T1-NP3636- -O
SQ 36 SOLID FIXED TOP COUNTER HEIGHT TABLE
PART NO FIGURE DESCRIPTION QTY
Legs
Table Top 1 pce
4 pcs
T1-NP3636-01
T1-NP3636-13
T1-NP3636-13
T1-NP3636-07
T1-NP3636-07
Hardware Bag 1 pce
IMPORTANT NOTE : Please keep all hardware parts out of the reach of children.

TFS-16532-SNMWC MADE IN MALAYSIA
Page 2 of 2
Flat
Washer
Lock
Washer Hex Bolt
Wrench
Turn table top upside down on a soft protective surface such as carpet. Insert table legs into table top
using the provided hardware as shown on Fig1.
ASSEMBLY :
STEP 1
STEP 2
Fig.1
T1-NP3636- -O
SQ 36 SOLID FIXED TOP COUNTER HEIGHT TABLE
Reminders :
Two people are needed for assembly.
Use only hardware supplied.
Do not over tighten bolts.
This item may require periodic tightening.
HARDWARE PART :
Wrench
Flat Washer
Lock Washer
1 pc
8 pcs
Hex Bolt
8 pcs 8 pcs
Check its balance and tighten all bolts to complete the assembly.
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
IMPORTANT NOTE :
~ Please keep all hardware out of the reach of
children.