
QUICK USER GUIDEQUICK USER GUIDE
Main Accesories (nd more information at Wisycom.com )
LBC61LBC61
This guide is intended to assist you with initial quick setup and
operation of your Wisycom product.
You can refer to Wisycom Autorized Distributors for technical
Support and information about service and repairs available in your
area or contact us directly by email.
Serial Number: Purchase Date:
Download Documentation and Firmware
Get declarations, user manual, specica-
tions and softwares on the download page:
wisycom.com/products/d/LBC61
Keep up with Wisycom online
Follow us on Facebook and Instagram. You
can also subscribe on Youtube for more.
wisycom.com/social
Product Registration and Warranty
Register your product to extend your warranty
and receive update on latest rmware:
wisycom.com/registration
WISYCOM S.r.l.
Via Tiepolo 7/E
35019 Tombolo (PD) - ITALY
WISYCOM INC.
14301 Sullyeld Circle, Suite C
Chantilly, VA 20151- USA
+1 703-574-7505
+39 0424 382605
LBC61-en-q02-ISTR-LBC61
IC
POWER
8÷17Vdc
LTCSYNC
LINK/ACT 10/100
USB 2.0 HS POWER
8÷17Vdc
LTCSYNC
LINK/ACT 10/100
USB 2.0 HS
LINK / ACT 10
/
100
Follow the instructions alongside to secure the
charger to the desired surface using the screws
and spacers available in the accessories bag.
Cascade via USB
Secure Charger
LBP61: rechargeable Lithium-ion battery
Model CS-BCE10,
Part No. CGA-S008E
3.7V, 1050 mAh, 3.9Wh,
Cameron Sino
PSP15V4A0-H: Power supply 9-17Vdc,
DC Connector, screw Type 5.5x2.1mm.
Included with LBC61.
We recommend only using the Wisycom power
supply.
EU DECLARATION OF CONFORMITY
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
wisycom.com/products/d/LBC61
USA and CANADA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1 - This device may not cause harmful interference, and
2 - This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Cascade multiple LBC61 using the USB ports to
update the rmware and download the recorded
les on multiple MTP61 simultaneously.
Note: if you connect more than two LBC61 in cascade you
might experience a downloading speed reduction.
POWER
8÷17 Vdc
LTC SYNC
LINK / ACT 10/100
USB 2.0 HS
POWER
8÷17 Vdc
LTC SYNC
LINK / ACT 10/100
USB 2.0 HS
Ethernet Connection
Default static IP address: 192.168.1.10
Reset procedure: with unit on, keep pushed the reset button
for more than 2 seconds to restore the default IP address.
We recommend using Ethernet cables of maximun 3m length.