Woodard Ellery User manual

1 of 5
Photo 1
Photo 2
Ellery Coffee Table
Assembly Instructions
Step 1: Remove protective wraping and lay all parts on floor and Identify all parts packed in carton
against attached parts list.
Step 2: Lay top (A) upside down on floor, so bottom is facing up. Place a protective soft material
on floor before placing top of table face down on floor.
Step 3: Then attach each of four legs (B) to the bottom as shown in Photo 1, using Bolt(E) and
Washer (F) and Bolt cover(G). Attach Stretch (C) to Leg (B) using Bolt (D) and Washer (F) and Bolt
Cover (G) as shown in photo 2.
Step 4: Make sure all bolts are aligned properly and tight and then place bolt covers over bolts.
Then with a second person's assistance, please turn the table over onto it's legs carefully using a
flat surface .
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY

2 of 5
Diagram:
Ref
Part Name Part Image Qty Ref Part Name Part Image Qty
ATable Top 1EBolt (Long) 8
B Leg Panel 4 F
Washers 16
C Stretch 1 G
Bolt Cover 16
D Bolt (Short) 8 H
Hex Wrench 1
WOODARD
Customer Service Hours
8:30 am- 5:00 pm CST Monday to Friday
Phone: ( 800) 560-9095 Fax: ( 214)- 499-6199
Photo 3

JHex wrench
B 1
CWasher 4
D
Bolt 4
EWasher 4
FWasher
G
Nut
H
Bolt cap
I
Bolt cap
A
1

Hex wrench