Woodard Uptown RXTV-08BCT-T User manual

Uptown Balcony Table
RXTV-08BCT-T
Assembly Instructions
Step 1: Remove protective wraping and lay all parts on floor and Identify all parts packed in carton
against attached parts list.
Step 2: Lay mesh top (A) upside down on floor,so bottom is facing up.
Step 3: Then attach each of four legs (B) to the bottom as shown in photo 1, using Bolt(D) and
Washer (F) and Bolt cover(G). Attach Center Ring (C) to each four legs using Bolt (E) and Washer
(F) and Bolt Cover(G) as shown in photo 2.
Step 4: Make sure all bolts are aligned properly and tight and then place covers over bolts and
nuts. Then turn table over onto its legs.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY
photo 1
B
A
G
F
D
G
F
D
1 of 2

Photo 2 Photo 3
Diagram:
Ref Part Name Part Image Qty Ref Part Name Part Image Qty
A Table Top 1 E Bolt 8
B Leg 4 F Washer (M6) 12
C Center Ring 1 G Bolt cover 12
D Bolt 4 H Hex wrench 1
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
PRINTED IN CHINA
G
E
F
C
2 of 2