Woodard 1172-BXU User manual

Uptown 72"x 42" Boat Shaped Mesh Dining Table
1172-BXU
Assembly Instructions
Parts List:
A. 1 Table Top F. 20 Washers
B. 4 Legs G. 4 Nuts
C. 2 Support bars H. 20 Bolt Covers
D. 1 Bracket I. 1 Hex Wrench
E. 16 Bolts J. 1 Hex Wrench
Step 1: Remove all protective packing materials and assemble all parts on a flat
surface.
Step 2: Identify all parts packed in carton against attached parts list.
Step 3: Assemble all of the following parts together as shown in picture below:
Table Top(A),Leg(B),Support Bars(C) etc.. If needed, turn furniture upside
down to facilitate assembly. Make sure all parts are aligned properly
before tightening any bolts and nuts.
Step 4: Tighten any bolts and nuts by using hex wrench (J) included in parts
bag. Cover bolts with bolt covers and nuts with nut covers. Be sure
bolts and nuts are tightened securely and aligned. It is user’s
responsibility to make sure all parts are assembled and tightened
correctly and securely.
1 of 2

Diagram:
Ref Part Name Part Image Qty Ref Part Name Part Image Qty
A Table Top 1 FWashers 20
B Leg 4 GNuts 4
C Support bars 1 HBolt Cover 20
D Center Ring 1 I Hex Wrench 1
EBolts 16 J Hex Wrench 1
Photo
1
Photo
2
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
PRINTED IN CHINA
2 of 2