Woodard W22130 User manual

Oceanside Coffee Table
Item #W22130
Assembly Instructions
WARNING!: TABLE IS NOT MEANT FOR SITTING OR STANDING ON. DO NOT SIT / STAND ON OR LEAN FULL BODY
AGAINST TABLE. IMPROPER USE MAY LEAD TO PRODUCT DAMAGE AND/OR BODILY INJURY.
Diagram 1
**TO AVOID POTENTIAL SCRATCHING TO PARTS BY ROUGH GROUND SURFACE, COVER GROUND WITH SOFT SMOOTH
PROTECTIVE MATERIAL ON WHICH TO PLACE PARTS DURING ASSEMBLY. **
Step 1: Remove protective wrapping and lay all parts on floor. Identify all parts packed in carton against the parts list.
Step 2: Lay Table Top Frame (A) upside down on floor, so bottom is facing up. Place a protective soft material on floor
before placing table top face down on floor.
Step 3: Attach each of four table legs (B) to the bottom as shown in Diagram 1, using Short Bolt (D) and Washer ( F).
Then attach Stretcher (C) to Leg (B) using Long Bolt (E) and Washer ( F) as shown in Diagram 2. Loosely thread all bolts
on first. After all parts are assembled in place, go back to securely tighten all bolts with Hex Wrench(H).
Step 4: After making sure all bolts are aligned properly and tightened sufficiently, place Bolt Covers (G) over bolts. Turn
table over to upright position onto flat surface as shown in Diagram 3.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED PROPERLY AND
SECURELY.
A
B
F
D
G
1 of 2

Diagram 3
Ref
Part Name Part Image Qty Ref Part Name Part Image Qty
A Table Top 1 E
Long Bolt 4
B Table Legs 4 F
Washer 12
C Stretcher 1 G
Bolt Cover 12
D Short Bolt 8 H
Hex
Wrench
1
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
E-mail:[e-mail]
Diagram 2
PARTS LIST
06-2021R
PRINTED IN CHINA
CE
G
F
2 of 2