Woodard Woodcliff WDC-WOO-CTBL User manual

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY
Woodcliff Coffee Table
WDC-WOO-CTBL
Assembly Instructions
Step 1: Remove protective wraping and lay all parts on floor. Identify all parts packed in carton
against attached parts list to make sure all parts are present.
Step 2: Lay top (A) upside down on floor, so bottom is facing up. Place a protective soft material
on floor before placing top of table face down on floor.
Step 4: Make sure all bolts are aligned properly before tightening. After making sure bolts are
secure and tight, place bolt covers over bolts. Then with a second person's assistance, carefully
turn the table over onto its legs. Be sure legs rest on a flat surface .
Step 3: Then attach table legs (B) to the bottom as shown in Diagram 1, using Bolt(E) and Washer
(F) and Bolt cover(G). Attach Stretcher (C) to Leg (B) using Bolt (D) and Washer (F) and Bolt Cover
(G) as shown in Diagram 2.
B
Diagram 2
Diagram 1
A
B
F
E
G
C
GDF
1 of 2

Parts List:
Diagram 3
2 of 2
Ref Part Name Part Image Qty Ref Part Name Part Image Qty
A Table Top 1 EBolt (Long) 8
B Table Leg 2 F Washer 12
C Stretch 1 G Bolt Cover 12
D Bolt (Short) 4 H Hex Wrench 1
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
PRINTED IN CHINA
2014-4-11
2 of 2