Worden F-T-36 User manual

Folio Installation Manual
7/8/2010 Page 1 of 8
Assembly instructions for catalog numbers:
F-T-36
F-T-42
F-T-48
F-T-60
F-T-72
F-T-90
(Trestle assembly)
Tools required for assembly:
#3 Phillips screw driver bit with extension
Power screw driver
5/32” hex wrench

7/8/2010
Parts required to install (1) assembly:
(1) – Trestle frame
(1 – plain cover) -and- (1 – wire management cover)
(2) – Cover panels

7/8/2010
Hardware required to install (1) assembly (shown actual size):
(4) #12 x 5/8” pan head wood screws – black (part# 4300-1738)
(2) 1/4-20 x 60mm (2-3/8”) decorative head bolt – nickel (part# 31685N)
(2) 1/8” x 1-1/2” x 1-11/16” trestle spacer (part# 26671) (for floating panel end frame tables only)

7/8/2010 Page 4 of 8
1(4) #12 x 5/8”
Attach the trestle frame to the underside of the work surface.

7/8/2010 Page 5 of 8
2a
(For Floating Panel tables only)
Attach the trestle frame and spacers to each end assembly.
(2) 1/4-20 x 60mm (2) Trestle spacer

7/8/2010 Page 6 of 8
2b (2) 1/4-20 x 60mm
(For all tables except Floating Panel tables)
Attach the trestle frame to each end assembly.

7/8/2010 Page 7 of 8
3
Install the trestle covers onto the trestle frame.

7/8/2010 Page 8 of 8
4
Assembly is complete. Adjust glides as needed.