Worden MS.M.2B.39 User manual

MySpot Installation Manual
8/9/2010 Page 1 of 34
Assembly instructions for all catalog numbers beginning with:
MS.M.2B.39
MS.C.2B.39
(Back-to-back double seat with right hand and left hand tablets and with a 39” high back panel)
Tools required for assembly:
#2 Phillips screw driver
#3 Phillips screw driver
Slotted screw driver
5/32” hex wrench
3/16” hex wrench
6mm hex wrench
5/16” open end wrench
Hammer
Needle nose pliers
Power screw driver (optional)

8/9/2010 Page 2 of 34
Parts required to assemble (1) unit:
(1) – Back panel
(38-3/4”H x 68-3/4”W)
(4) – Inner back cover panels
(22-3/16”H x 31-7/8”W)
(4) – Internal end panels
(21-1/16”H x 22-1/2”W)

8/9/2010 Page 3 of 34
Parts required to assemble (1) unit (continued):
(4) – End left face cover panels
(21-3/16”H x 22-1/2”W)
(4) – End right face cover panels
(21-3/16”H x 22-1/2”W)
(2) – Seat support beams
(64-1/8”L)

8/9/2010 Page 4 of 34
Parts required to assemble (1) unit (continued):
(2) – Left front legs
(2-1/4”SQ x 24-3/16”H)
(2) – Right front legs
(2-1/4”SQ x 24-3/16”H)
LH RH
(2 each) - Left hand and right hand tablet assemblies
(2) – Arms
(6”W x 53-3/4”L)

8/9/2010 Page 5 of 34
Parts required to assemble (1) unit (continued):
(4) – Bottom panels
(23-5/8” x 27-3/8”)
(2) – Center tables
(14-5/8”W x 25”D)
(4) – Back cushions
(4) – Seat cushions
(4) – Z-bars (21-3/16”L)
(6) – Pin-fast brackets

8/9/2010 Page 6 of 34
Hardware required to assemble (1) unit (shown actual size):
(8) 1/4-20 x 1-1/4” pan head machine screws – zinc (part# 4300-1504)
(8) 5/16-18 x 1” flat head socket cap screws – black (part# 26797)
(2) 1/4-20 x 85mm (3-3/8”) decorative head bolt – black (part# 26506-BLK)
(16) #12 x 3/4” flat head wood screws – zinc (part# 26791)
(22) #10 x 1-1/4” flat head wood screws – black (part# 1001591)
(4) #10 x 1-1/2” flat head wood screws – black (part# 1001592)
(16) #8 x 5/8” pan head wood screws – black (part# 1001742)

8/9/2010 Page 7 of 34
Hardware required to assemble (1) unit (shown actual size) (continued):
(32) #12 x 5/8” pan head wood screws – black (part# 4300-1738)
(4) #12 x 1” pan head wood screws – black (part# 1001739)
(48) #14 x 3/8” shoulder screws – zinc (part# 26794)
(24) Cam pins – nickel (part# 29989)
(4) Cam pins – nickel (part# 1000336)
(2) 1/4-20 barrel nut – steel (part# 20434)
(24) Cams – zinc (part# 26795)
(4) Cams – black (part# 1000335)

8/9/2010 Page 8 of 34
Hardware required to assemble (1) unit (shown actual size) (continued):
(8) 1/4-20 hex nuts – zinc (part# 1003541)
(8) 1/4" lock washers – zinc (part# 1003542)
(22) Figure-8 fasteners – zinc (part# 1001663)
(8) Lock clips – black plastic (part# 1000611)

8/9/2010 Page 9 of 34
1(8) 1/4" lock washers (8) 1/4-20 nuts (8) 1/4-20 x 1-1/4"
Attach the Z-bars onto both sides
of the internal back panel.
1 2 3 4

8/9/2010 Page 10 of 34
2 (8)Shoulderscrews
Screw (4) shoulder screws into (2) inner back cover panels.
1 2